Summary: I'm working on a system that originally had Windows 98 SE, ran well for a couple years, in the last year it would hang on startup 5/6 times; It works ...
Summary: Hi My system works fine for a few weeks, then it starts to randomly freeze. I realised that one of my RAM sticks was rubbish, so I binned that. Then I...
Summary: A friend of mine recently tried to upgrade his Ram and installed pc2700 rather than pc2100. after taking the 2700 module out, the system wont boot up,...
Summary: I just bought a SuperMicro P6DBE board rev 3.0 with BIOS v2.0 on it. I tried 2 (Dual board) cpus in the machine and after it did the memory test, it w...
Summary: My laptop hangs on the first screen after I press the power button, it says "Change System Settings, press DEL". When I hit DEL it takes me to another...
Summary: I'm trying to build a second computer for my kids. I took a system that had a bad motherboard and installed a new(open box) motherboard and new CPU. ...
Summary: Late last week I started having crashes on my IBM Aptiva - these were Windows 2000 blue screen of death crashes about every ten minutes and typical...
Summary: Hi, Just encountered a weird problem. As a result of rebooting a couple of times my computer now keeps entering BIOS on startup and there seems to be ...
Summary: My computer still hangs on the first boot at the POST page. I have changed the Motherboard battery but it still persists. Also have just done a comple...
Summary: laptop shut itself down and now freezes on startup if very cold gets as far as wallpaper and loads startup programes then freezes if i try again gets ...
Summary: So I decided to upgrade my motherboard and processor. I bought a MSI P55-GD65, and a Intel I5, installed with no issues (ive probably built 20+ comput...
Summary: I have a desktop PC I got a few weeks ago. On startup there is a Gateway logo. Belarc shows it as a Gateway 2000. I do a system scan on Gateway suppor...
Summary: I've had my custom-build Dual-P3 box for about 3 years. It's a dual p-3 800 with 786 MB RAM and a Ti4600 Vid Card.It has a bootable 20 GB HDD with a 1...
Summary: I have built a new computer; when i press the pwd button, the computer start, but nothing on the screen, and i have to press the reset button to start...
Summary: I've just installed a new motherboard, new processor, new stick of RAM, new power supply unit after an old power supply fried the old mobo, cpu, ram. ...
Summary: Hi, I just received an XFX 6600gt in the mail earlier today. I am upgrading from a Radeon 9600se, so I uninstalled the ATI drivers, and took the card...
Summary: My computer hangs for no apparent reason. The screen goes black and it won't turn off by pressing the power button or the reset button. I have to eith...
Summary: Just had my monitor cable replaced, and re-plugged it back into the same computer/graphics card (ATI Xpert 99, Rage 128 Chipset) and it hangs with "RA...
Summary: i have a problem when i install my internal scsi cd burner. at the startup before windows it says press ctrl+i to start scsi utility setup. that tells...
Summary: I am having trouble installing a pci Realtek network card (SN-3200 series LAN card) in my Pentium 3 PC. I thought the first one was faulty so I tried ...
Summary: I just installed a LG DVD drive on my Dell Dimension E310. After startup I received the Drive not found message for PATA-0 (PRI IDE MASTER) and for PA...
Summary: Everytime I power on my system I get a blank screen with the following caption " file corrupted.windows root >\ system32\ vitoskrnl.exe". My Mac was w...
Summary: I want to place a password on my desktop so that when you start it up, you must have a password before the "startup" menu even begins it seqencing ...
Summary: Hello there, I have a friend's computer that quit booting one day. He said he didn't add any progs or hardware recently. He did change a power managem...
Summary: I recommend to try starting from a floppy disk first. Then check if all you drives are present. I don't know if the DVD drive automatically detects ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
