Summary: I have a laptop that when you press the power button, all the lights turn on, but nothing shows up on the screen. First time this occurred was after ...
Summary: Hello I was trying to clean my comp, so I unplugged all pins from the power supply, then I replug it. Now my computer wont boot up properly. I removed...
Summary: I have Windows ME installed on a Fujitsu ErgoPro X365 P2 350 MHZ.I am attempting to install a Verto Gforce4 MX 420 PCI graphics card and all i get at ...
Summary: I recently tried to upgrade a Sony Vaio and after adding 2 new sticks of pc66 64mb ram all I got was a blank screen. The machine in question has an in...
Summary: A friend of mine Just purchesd a TI 4200 and when he boots up he gets a blank screen, he did try the card on another computer and it works fine! Does...
Summary: I do get the beeps and the hard drives on startup. I tried a different monitor and also diff graphics card, both still show blank screen?? ...
Summary: I have an M810 mother board and every time I try to run Win98se setup from DOS, it gets to the point of copying needed files to start setup and goes t...
Summary: Yesterday I had the task of swapping a floppy drive ribbon cable with a new one (as the old one didn't work). After doing this, I started the pc, and ...
Summary: When i started up my laptop the compaq logo appeared as normal however, once that came on the screen went completely blank. The laptop carried on load...
Summary: This is my first post, but I surely will visit that board more often. OK, I had an old PC with only a PII 500+ Mghz. It was time to upgrade. So the i...
Summary: I was logging out of an online game today when my screen went blue and I recieved a stop message saying some nv .... dll wasn't right. Of course like...
Summary: Hi all, here's one for you: The DTK 440BX (PRM-27I) motherboard I'm using supports AGP 2X and a 133MHZ FSB (through a BIOS option). The computer boot...
Summary: The display on my Packard Bell iPower has suddenly decided to stop working. When it turns on, nine times out of ten I get nothing but a blank screen, ...
Summary: Alright first of all, I just got this computer at a garage sale, it was working perfectly, i had added another video card to it with more ram (it did ...
Summary: (Note, everything in this has been from googling my errors over the last five days, myself, I know relatively nothing in this subject ) The backgroun...
Summary: I bought a 256MB PC133 DIMM for my SE440BX. The FSB is only 100Mhz but the DIMM should be backwards compatible. However when I insert the DIMM, all I ...
Summary: I have a very frustrating problem and i was wondering if any could help?? I have just installed a motherboard with a k6 450mhz processor with 128mb ra...
Summary: Hi I just installed a new video card, and now after installing the drivers for it my monitor goes blank after entering windows. I believe it must be r...
Summary: blank screen, no icons, // same in safe mode. ran scanreg / restore -- 4items, first one stating 04/19/06 not started 09:40:15am rb002.cab I think ...
Summary: When i start my computer up i get a blank screen. There is no beeps at just powers up and shows nothing. I have tried a different Monitor and put all ...
Summary: I have an ATI RADEON 9800 PRO 128mb video card. Last night I attempted to change the video drivers from the regular ATI ones to the Omega Drivers (www...
Summary: Hello all! Yesterday my momīs puter stoped booting. All I get is blank screen with no beeps. I can see all fans working and I can hear the HD working...
Summary: Are you sure it's my video card.... I mean...a Visiontek GeForce 4 Ti4200 is a pretty reliable video card after all...not a lot of problems to be know...
Summary: I also have the same problem w/ my pc there where blank screen... i try to remove the RAM and turned it on but there is no beep. my motherboard has a...
Summary: i am using Inno3D Geforce 4MX 128mb card, it works fine at the first time reboot, but after i set all the setting to maximum & reboot, i got a blank s...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
