Summary: Mt printer, fax, scanner, copier combination is leaving a black line down the middle of everything that comes out of it. Do you know what is wrong an...
Summary: I have a hp deskjet 520 printer that will not respond to my 486 gateway computer. I have tried with windows 3.11 and 95. I have the disk that came wit...
Summary: I think you mean the HP OfficeJet All-in-One 500 Series (500,520,570,580 & 590) which all use the same driver set. Drivers for 3.1, NT4.0 & 95/98 are ...
Summary: I have tried updating my HP Laserjet 4L printer driver in windows 3.1, but when I run the updating sequence in the printer section of the control pane...
Summary: This is the address of the file you need http://www.hp.com/cposupport/printers/software/dj400en.exe.html Download it and copy the file to a temp direc...
Summary: You could read through the manual and see if the Z32 can emulate any other printer (usually a HP or IBM printer of some sort). Try the drivers for th...
Summary: I have a Hewlett Packard Deskjet 520 printer, running it in Windows 3.1 Up until yesterday it worked fine, now when printing from any windows based pr...
Summary: Hi Jnr0000: According to HP's web info, the 940c need at least a Pentium 66 & 32 MB RAM for Win 95/98 or NT. You could try using an older Deskjet driv...
Summary: ilost word pad cant install my printer or scanner because it comes on the screen you dont have word pad and this is needed to install programs I have ...
Summary: Guess I just want to do a poll for 486 based or older pc's with 3.1 & dos. Poor ol 3.1 just don't get very many posts anymore. You can cheat a little ...
Summary: In my case, the OCR software was installed as part of the HP all in one(fax, print, scan) software package. The user deleted that software, but the st...
Summary: I need a .drv file to install a HP deskjet 500 printer on windows for workgroups 3.11. It should be on disk 7. Tried www.kewlone.com but it wouldn'...
Summary: I am having a problem with a windows 3.11 machine. I have just installed an HP Deskjet 840C printer on it with the latest 3.11 drivers from HP's site....
Summary: for the record i had win98FE running on a 486DX/100mhz/16mbs (72pin simm)ram/1G hard drive. had printer and scanner hooked up. slower than hell, but h...
Summary: I bought a 128mb ram, 1ghz cpu (pentium 3), hp deskjet 930c, digital camera, scanner, cd rw 32x speed and 64x speed DVD Rom for cheaper than that from...
Summary: Thanks Matt, But that is not quite what I am looking for, I went to the site and looked over the program, even downloaded and used it but it does have...
Summary: Can anyone supply me with a generic win3.1 hp deskjet driver which supports black/white & colour printing. My current file HPDSKJET.DRV file only supp...
Summary: Depending on the quality you want out of your photographs the thing to look for is how many DPI(dots per inch) your printer is capable of using. The ...
Summary: Due to a new school computer not having an ISA slot, we are trying to install an HP ScanJet 4P scanner using the SCSI card in a 3.11 computer. Althou...
Summary: email me. I have a HP Deskjet 540. I might be able to walk you through the solution if I can try a few experiment first. Check your printers icon in c...
Summary: In 1994, I bought my first computer, a 33-MHz, IBM PS/1 along with an HP 520 B/W printer. The total cost was around $1,500.00. No, not just $1,500; ...
Summary: After numerous searches I finally located this forum & have been very impressed. Now that I need help with Win'98 I can find nothing comparable. I hav...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
