Summary: Wanting Win95...Computer has 8mb, 211mb...So I know 95 would be stretch. Should I upgrade? I have found many sites with memory upgrades (mine support...
Summary: I downloaded SVGA.EXE and used it in SETUP of Windows 3.1 on HP vectra 486 with Phoenix BIOS & Phoenix video circuitry built into main board. Th...
Summary: I have this HP Vectra 33/486 that I want to play with. Before 1/1/2000 I could get it up and running but it would not let me change anything. After Ne...
Summary: I have this HP Vectra 33/486 that I want to play with. Before 1/1/2000 I could get it up and running but it would not let me change anything. After Ne...
Summary: I got a 486/66DX some time ago. It was an old HP Vectra that some company had thrown out. And no wonder, they were running Win95 with 8MB of RAM in ...
Summary: The day I began upgrading my old HP Vectra 5/75 to win 95 has been the worst day of my life. 95, sometimes works, but usually doesn't. Connecting to ...
Summary: Yes, I have a HP/vectra M2/4/66 Admin5..My problem is that when I go to start it, It goes into the bios,then it goes through and checks everything,Now...
Summary: I got an HP Vectra series 4 5/100 that I purchased back in 1996 with DOS 6.22 and Win3.1 on it. It's the original OS that the machine shipped with too...
Summary: I need the sound driver 4 this system.It has a PnP sound chip.I was thinhing it's a ALS but installed and didn't work.I even tried the HP driver page....
Summary: Pulled this from a DOS 5 manual: Himem.sys has a /machine:xxx switch to use if problems with A20 line. Substitute either the number or the machine eq...
Summary: My dh and I are fortunate enough to have 2 new computers We have collected several oldieS, but goodieS. I want to restore the puters and donate some g...
Summary: Due to virus attacks and errors we found ourselves with an HP Vectra with a C unbootable hard disk with W3.1 and no DOS on it. Not having the right bo...
Summary: Hi, I am working on an Hp vectra Admin 5 4/66 I went to open it up to install a cd-rom and found another hard drive in the place where the cd rom i...
Summary: 386-16 2Mb - Runs 6.22 only hp vectra ve x/66 with 100Mhz AMD chip and 16Mb - Runs Win95b and solid as a rock p60 16Mb - Runs 6.22/WFW 3.11 (2) p54c@1...
Summary: i have a cd rom driver that i am trying to install on windows 3.1. the computer is a HP vectra VL series 4 5/133. i install the driver and it does it...
Summary: Have kx-p1524 24pin, hp vectra qs/20, dos 6.22, win3.11, need instructions for dip switches, etc., so that it may be properly installed. Thank You...
Summary: I recently got a HP Vectra VE with 96 mb ram 200mhz, Windows 95 and no cd rom drive. i wanted to see what Windows 3.0 was like, so i wiped the HDD and...
Summary: Hi, I've been given an old HP VECTRA RS/25C (386, 1.2-Mb & 1.44-Mb flexible disk drives). Everything works fine, but I don't know how to get to the BI...
Summary: Hi everybody! I posted a message here a few weeks ago about connecting Win3.1 to the internet. Well, You all gave me great advice. I managed to get a ...
Summary: I installed 3.11 on my machine and apart from being able to play none of my games (c&c RA,need for speed3,etc) I couldnt use icq cuz there is no taskb...
Summary: i bought a HP Vectra VL series 4 5/133 its a pentium 133mhz it has a cd-rom paid $25.00 for it. comes with keyboard and mouse. you supply the monitor....
Summary: Sir I have a HP Vectra pc (Vei8) . Its operating system is WFW 3.11 . I need to open Com1: port but windows can't open. (I am trying with terminal....
Summary: Hello everyone! OK. At first I thought my mouse was broken, but now I tried it on another computer (with Win98) and it works fine... But it doesn't wo...
Summary: I had one also...it was an HP Vectra 2V or V2 or whatever it's called, and it had 16 MB RAM, a 1 GB hard drive, an Intel OverDrive 66 MHz "extra" proc...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
