Summary: Hey all, I am having an issue with an HP PSC 2510. I have a pc and a laptop connected to a wireless router both work fine on the internet. the pc prin...
Summary: I have 1) mac 1) ME, 2 win 2000 worstation, hp printer and 5 port hub connecting to cable modem with dynamic ip. my question is 1) I want all the pc a...
Summary: You could get a second wireless card for your laptop. Connect one to the printer and one to the hotel network. -Ryan Adams Free Computer Tips and more...
Summary: The jetdirect 170x is a print server so you should be able to plug that direct into your router. You then plug the printer into the server. Before yo...
Summary: I have a USB 2.0 printer that i want to give access to people in my house. Correct me if im wrong: I buy a wireless print server (read about pros of i...
Summary: Hello: I received some wireless networking gear for Christmas. It is all of the D-Link "Air Plus" series; a DI-614+ Wireless Router, a DWL-520+ PCI ...
Summary: Can I use a wireless router to set up my network with my satellite connection, or do I have to use a WAP. The connection must go through my main comp...
Summary: We just got a new Belkin wireless router and since then we have been unable to connect to the Xerox printer and print wirelessly on the network. Any i...
Summary: Run the network configuration wizard on both PC's, picking connecting through a residential gateway option, and use the same workgroup. Also pick Ena...
Summary: I have a wired and wireless network - desktop hardwired to router and laptop wireless. It works great. You do need a NIC card for the wired computer...
Summary: Actually the above are not quite true. When HP printers and multifunction devices came out, some actually stated in the documentation they could not b...
Summary: Alright what I did was I set up the home network. I put the printer to share. I then went onto the other computers on the network (the ones that aren'...
Summary: I am having troubles trying to setup a network bridge between my wired lan and wireless lan. When I select both network interfaces to be bridged and r...
Summary: You can connect wireless router to one of the ports and wireless connection should work. Your IPs will be different for WiFi connected hosts. Hope thi...
Summary: I'm assuming your network is set up properly and File and Printer Sharing is enabled. On your 8300, go to Printers and Faxes, find your printer, righ...
Summary: Hi I have just bought an unlocked BT 2091 router and have tried setting it up with my current internet connection. I can connect fine through the ethe...
Summary: C is a yes also. You would have to setup ics on the B pc between the nic and wireless card. You would have to successfully setup a adhoc wireless co...
Summary: I have a H.P 840c printer attached to a pc running win 98se that is being used by as a print/internet server for 4 other systems on my LAN. The probl...
Summary: OK, Thanks to the advice that Viper gave another user, I was able to get my home network up and running. I have Win 2K with an HP printer, and the oth...
Summary: I am having trouble getting my desktop and laptop computers to share the same printer. I have all the equiptment necessary to setup a network, includi...
Summary: We are losing network printers and shared drives like crazy! I dont understand. I ran some Windows Updates recently, is there a setting that denotes a...
Summary: All most all home wireless router would allow you to have wired and wireless. Many of wireless routes have troubles in stability, so check them out ca...
Summary: You'd want to have a router, not a switch. Luckily, a SOHO router with 4 LAN ports is essentially a switch with NAT/DHCP and a firewall added to it s...
Summary: My dell laptop can wire and wireless both connect into internet. Before I always use wireless to access internet, it is no any problem. Last week, I u...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
