Summary: Hi, after a failure in my power supply my Asus V7100 Geforce 2 MX only works with 2D but freezes in 1 to 60 seconds when I start a 3D game or benchmar...
Summary: problem: computer starts after ac power is restored (when ac power failure occurs) even if computer is off. i went into bios>power>after power failure...
Summary: I dont think you have a problem Assuming toy have an ATX PSU, the Power supply appears to be working as designed. The computer is not meant to come o...
Summary: Hi, I need a second opinion on what I suspect is wrong with my computer. I just replaced a 8meg vid card (PCI) with a 64meg card (AGP) and now I a...
Summary: Common problem in some areas. Check the system BIOS section under Power Management Setup, and look for an entry like "State After Power Failure" optio...
Summary: Hello all, happy new year to all. I am currently having a major problem with my pc. It is switching itself off at random. It is like the pc loses powe...
Summary: Hi all, Here is the story. My sister was using the com while surfing the net and suddenly the computer just black out without any warning. Since then,...
Summary: Hello all My Pc at the moment is ramdom turning itself off. It is like it is a power failure but i have checked it in safe mode and it is ok. It also...
Summary: If you provide the make and model of your brand name system, or the make and model of your mboard, we can probably help you better. "...I accidentall...
Summary: can anyone help me, i'm having graphics problem. i've installed several games in my pc namely: battlerealms:winter of the wolf, warcraftIII: frozen t...
Summary: I'm having trouble with getting my PC to post following an AC power down or failure (unpluged or switched off at the PS). If I remove power from the ...
Summary: It sounds to me like an incorrect BIOS setting. "rechecked my Bios Setup per the manual" Why exactly does that mean? The settings printed in your manu...
Summary: Enter the bios setup. In the power settings look for an option that says something like `State after power failure'. Set it to `former state'. ...
Summary: CPU is reading 47°c (116°f) and mobo around °45, and that's just after it has shut down in the middle of a windows install... seems damn high for a...
Summary: Hi, I got an issue, During installing windows and formatting, the power failure occures. And now my hard disk drive which is of 80GB capacity, shows o...
Summary: I also this problem. After power on Thinkpad 380Z 2635 gives errors 161 & 163. It doesnt allow me to set date and time. As far as I see from other pos...
Summary: The BIOS for the rig I am on right now has the following options, which I am not sure if this is a complete list. Wake on: LAN Scheduled time/date FAX...
Summary: are you sure the cmos battery jumper is a)in the correct position and b) is not missing altogether. The PC starting when you plug the power cable in i...
Summary: I see these tabs: Main, Advanced, Power, and Exit. On the Main tab, I have these topics: Floppy Disk; Primary Master; Primary Slave; Secondary Mas...
Summary: I cannot even boot into safe mode. The Compaq screen comes up with Esc=Boot menu F10=setup F11=system restore. The PC Doctor screen comes up but i...
Summary: Hi Skip, thanks. Ok, still possibly a power issue. The 'power good' test is not unfamiliar to me, so plausible . ...Though getting to POST is not an i...
Summary: Hi, I hope this is an acurate description of my problem. I have upgraded to a new PC. This is fine. I am selling my old one to my best friend. The ol...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
