Summary: The AXP 3200+ is a 400MHz FSB CPU (200MHz actual), not 200MHz FSB (100MHz actual). It's supposed to run at 11 x 200MHz (2.2GHz). Leave the CLK SW on A...
Summary: Hello Skip, and thanks for your input. I don't have any extractor fans. That's my next move. Until then I'll be leaving the side panel off, that's sav...
Summary: I have a GA-7N400-L and it also reports 50-55 deg.C with an AthlonXP 2200+ and that's running underclocked at 200 MHz. The reason I switched the cloc...
Summary: Can someone help me get my pc to run at its correct speed. I've built a PC, here are the specs: -AMD XP2800+ CPU (Barton) -Gigabyte GA-7N400 Pro2 rev...
Summary: I'm a newbie to this stuff and need help overclocking my system. I have an amd 2600+ cpu and a gigabyte ga-7n400 motherboard. I also have 1GB of ddr4...
Summary: My mobo the ga-7n400 pro 2 by gigabyte will not allow me to change the multipliers through the bios. There are dip switches on the actual mobo but I ...
Summary: Hi I was wondering if this mobo will give a good overclock.. couse i want to overclock a AXP 2500+ Mobile to 3200+.. Will the GIGABYTE GA-7N400 give a...
Summary: hi, my computer seems to be operating a bit over the normal range of temperatures. I have a Gigabyte GA-7N400-L with Athlon 2800+. At idle, the system...
Summary: i just installed a new mobo on my machine its a Gigabyte GA-7N400-L and now my CPU is showing its a 1200 any ideas why this is or what i can do about ...
Summary: Hi, I know someone just asked this exact same question, but i thought if I would've replied to that thread it would be less likely to get a response t...
Summary: Hi all I'm new to the forum, but its helped me a lot with all sorts of problems, so now I thought I'd try asking a question, having never done so. I'm...
Summary: Hi everybody. I have a problem, please somebody help me. I have bought a Barton 2600+ and a a mobo gigabyte GA-7N400-L. I have read in several posts t...
Summary: i use everest home edition and speed fan that my mate install. both program match the bios reading. I played about with it using both paste and those ...
Summary: Gigabyte GA-7N400-L Mobo 1024 MB PC2100 Dual Channel Athlon XP 1800+ T-Bred I've overclocked my 1800+ to a 1900+ (1.6 Ghz), first time overclocking. T...
Summary: I'm new to this overclocking stuf, i was just wondering what is the most accurate temp reading software, because currently my bios is saying my cpu t...
Summary: Just wondering what my best/most cost effective option is here.. I have an unlocked Barton 2500+ (333MHz FSB) on a Gigabyte Ga-7N400 Pro. I do multitr...
Summary: I recently bought a gigabyte ga-7n400pro2. life was great until i decided to update the bios, after i did that, i restarted the pc and now i have a bl...
Summary: My Computer boots up when it wants to it gets stuck sometimes on verifing DMI pool data .... or when u try to enter the bios. This has started since i...
Summary: yeah i would go for it to. just make sure it runs stable at the 3ghz mark. also get some good cooling for your case, and your cpu. maybe your north br...
Summary: I'm wanting to toy with overclocking on my GA-7N400 Pro2 mobo + Barton 2600+ CPU, but can't get it to work. Main problem is that the CLK_RATIO switche...
Summary: Well looks like it was a dust problem (duh)because once I unhooked it and blew it out with the air compressor it cooled it down to around 52C and the ...
Summary: That is the same exact question I asked in my last post to this website. I'm just going to send mine back for a new one which will hopefully come by ...
Summary: Hello, I just purchased an Athlon XP 2500+ and a Gigabyte GA-7n400 Pro2. I have the proc O/C'ed to 2190Mhz (~XP 2800+) using the FSB, which is runnin...
Summary: Hi all, Yesterday, PC abruptly shutdown twice. No warning at all, similar to a power cut. Check the PC and the Power LED was on. Had to turn off the s...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
