Summary: I had such a thing in Win 3.1, where is it in NT 4.0? Problem is that I cannot find original drivers (card predates NT 4) and Trident (manuf) offers ...
Summary: Is there a way to define a specific text file name to Generic/Text Printer driver. I intend to bypass the filename input screen, when a print job is s...
Summary: Does anyone know of a printer driver for a fujitsu M3041R under Windows NT 4.0. I am using the generic/only text driver and print 100 columns, but i n...
Summary: This is an NT3.51/WfW3.11 issue, so I'm posting on both forums hoping for an answer : here goes. I have a HP 166 Mhz Pentium which dual boots btwn WfW...
Summary: Ok...I've seen many posts dealing with winmodems where they are told to throw them out and buy a hardware modem....but I have a driver that says it's ...
Summary: You can do it despite what these guys are saying. Here's a quoted article that I used and it worked perfectly with NTFS primary partition on drive1 a...
Summary: I was going to give you a link but I don't have it - although I have copied the whole document into this - it's long but it works. here it is: Add Win...
Summary: Hello everybody! I have set up a linux machine to make an lpd-queue demultiplexer. The WinNT4 is printing to this LPD queue, and the Linux is separati...
Summary: For the CD-ROM to boot at start up, it must be a bootable CD-ROM and your BIOS must support booting from a CD. If you have formatted your hard drive a...
Summary: I downloaded the NT drivers for my trident 3d 985 card. However, after I install the drivers and reboot, NT always reverts to 16 bit color with the ge...
Summary: Try booting from your NT CD or the 3 NT startup disks and using the 'REPAIR' feature. I think you'll require an ERD (Emergency Repair Disk) too. If yo...
Summary: I too have a similar problem. The generic NT joystick drivers are next to useless - as is NT hardware support in general. Nice one MicroS**ft. Thin...
Summary: Take a look at: http://www.techadvice.com/tech/C/CDROM_DOSSU.htm You can google: "IDE158.exe" and download this generic DOS CD Driver that has worked ...
Summary: Can anyone point me towards a generic IDE CD-ROM driver for Windows NT 3.51? I'm not sure if one is built into NT 3.51, but it doesn't seem to be wor...
Summary: Works great in '98, but can't seem to find a generic driver to set up "printing to file" on NT. When setting up the printer icon, in selecting generi...
Summary: I found that there is different between Windows 95 & Windows NT 4.0 "Generic/Text Only Printer Driver". Print out from my application work prefectly u...
Summary: I installed a generic test printer in my computer using WINNT 4.0 Service Pack 6a and in the Properties of the printer I disable the Page Break and st...
Summary: That seach string yields no results with google. Has your friend not got any info on the card? Has he just removed it from another PC? If so he must h...
Summary: A have a driver version V.42052 for trident tgui 9440 pci adapter with 2 MB RAM, but he resolution is not superior to 1024x768. Help me, a need a reso...
Summary: Hey, I'm looking for a driver for my UMAX Astra 300P parallel port scanner. Is there one I can use, or is there a generic TWAIN driver I can use for ...
Summary: Hi, Does anyone know about a driver for an USB Stick (USB Mass Storage Device) that can run on Win NT 4.0? It should either be generic (its a School C...
Summary: If the colors drop as you raise your resolution it's most likely cause your screen can't handle it!,how high can the color depth go at 640x480?,as f...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
