Summary: Hi folks, Just came into possession of my dad's old 386 machine from years ago. Still runs fine (Acros system, 80386 processor, 6 megs of RAM, 72 meg...
Summary: i have only one question...how woudl you free up XMS memory in DOS 6x? I know how to free up conventional memory, but i found out that it is my XMS me...
Summary: Are you sure your DOS programs are in short of memory or they call for extended memory? First of all Emm386.exe is an Expanded (not extended!) memory ...
Summary: In response to plainandsimple on response 6, i'm not sure what line to type in to load the drivers high. When i enter in the line, it still doesn't l...
Summary: I have a P4 system installed with DOS 6.22 and attached with Netware 4.11 server. I can't run BANK MASTER software as i have only 522KB of conventiona...
Summary: We run an EDI application on a windows 98 SE PC with 64MB RAM. We need at least 580K free memory under DOS to run the App. CONFIG.SYS contains the lin...
Summary: read! eXtended Memory Specification (XMS), ver 3.0 January 1991 Copyright (c) 1988, Microsoft Corporation, Lotus Development Corporation, Intel Corpor...
Summary: The USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 Reference Rev 3.1 =========== For a brief history on how I got to research on this very useful...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 and v2.15 Reference Rev 4.0 updated 25 Feb, 2004 by madmaxUSB =========== For a brief history on...
Summary: I was just reading a post in the Win 3.11 forum asking about a patch that will allow long file names in 3.11. Now is it just me, or isn't Dos 7.10 s...
Summary: Hi, Emm386 driver serves for 2 puproses. To emulate EMS memory and to create Upper Memory Block (UMB). The last usually serves to free more convention...
Summary: Anyone figure out how to access UMB when windows ME is running? I have a program that accesses the network through windows but it runs in dos it also...
Summary: USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 and v2.15 Reference Rev 4.1 updated 2 May, 2004 by madmaxUSB =========== For a brief history on h...
Summary: The USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 Reference Rev 3.0 =========== For a brief history on how I got to research on this very useful...
Summary: I am developping a driver program for a National Instrument's PCI card. But in the hardware profile it is showing only the Memory range under Windows....
Summary: I have Windows 95 with all the updates and stuff (sr2 or what-ever). Fat 32 as well. On boot-up I have my startup files give me a choice to boot into...
Summary: Is there a point to your excessively long post other than the chance to be an as- to anyone who reads this in an effort to see how to change the resol...
Summary: I' trying to play a game in dos or windows mode but it says that it is missing conventionnal memory. If I type "mem" it says that I have 581.392 free...
Summary: Fred6008, If you'll read what Travis and I posted, you'll see that we're all saying the same things: * DOS sets no arbitrary limits on resolutio...
Summary: Hi, To free more conventional memory try to modify your Config.sys file as follows: dos=high,umb device=C:\WINDOWS\himem.sys DEVICE=C:\WINDOWS\EMM386....
Summary: I have a Program called chainsaw that cuts files down to fit on a floppy disk. The only problem dos 6.22 cannot read the long file names. Example S...
Summary: I am trying to get a program to work on a DOS PC that has been compiled in Visual C with overlay linking. The program keeps crashing because of not en...
Summary: Core memory probably means conventional memory. An easy way to do what your doing is to boot your system 'clean' with a boot disk. I have created su...
Summary: Look for the name of the game followed by EXE or BAT. DOOM.EXE for example. In the example you type DOOM to get the game to run. **************...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
