Summary: I recently installed a Linksys WRT54GS router and now my laptop connects wirelessly. My kids play an online game (Combat Arms) that is a peer-to-centr...
Summary: Have PC with 2 network cards. Each card is attached to its own smart camera. Using IPX to communicate with cameras (NO CHOICE). Need to be able to c...
Summary: Hello Everybody. I have a nice problem: i need an application to get to a url i give it, but trough a proxy. Now, the application does not support pro...
Summary: Well, I solved my last problem, now I'm looking for a program that can send the DHCPRENEW message to force hosts to renew their IP addresses. I can't...
Summary: I am having trouble connecting to specific sites with my desktop which uses a cable broadband connection; I also have a wireless network installed. I ...
Summary: I have a computer with two NICs, that connects to two completely separate networks. One is the primary one, that I have all my work & e-mail on. The...
Summary: Hi Everyone, I have got a Linksys WAG54G V.2 Wireless Router and Modem and could not get the signal out to a far flung area of the house. I purchased ...
Summary: Unless you have experience of building electronic circuits I would think again or at least start on something a bit simpler. You are going to need to...
Summary: Ever hear of the OSI model? It is seven layers and is the blueprint for computing design. Networking is layer3 - ip routing Applications are layer7 -...
Summary: I have a Network Boot CD that I use for Ghost perposes. When I try to use it on the P100 it displays: Error: Unable to locate the nic. I am using the...
Summary: Consider another alternative. Put two NIC's in the PC you want connected to the internet. Plug one NIC into the wall outlet and set it up for interne...
Summary: I have 2 NIC 's in my main computer, which is connected to the internet through a cable connection. It has currently 1 ip in-bound to its mac address,...
Summary: WOW!!!...what a discussion... I work for a small computer consulting firm that specializes in networks of 25 users or less, one or two servers...most ...
Summary: Use word pad and write a script. I have never done this in windows but I have made a bridge router out of a linux box and it works great. Basically yo...
Summary: This question has been asked many times before. So I have a simple question for you. How do you tell an application which route to use? Answer to that...
Summary: Yes that should work. If you have trouble go to each NIC's advanced properties and make sure DHCP is properly configured. Just a question: Wouldn't it...
Summary: I have a network set up as shown in the hopefully attached diagram. I am on PC 3, and the router is set up to allow file sharing through it. Thusly, a...
Summary: Hi, Has anybody come across some GUI tool that shows me how will my current static or dynamic html pages look like in any WAP device? Being more speci...
Summary: I have been trying to make sure I am being clear in what I am wanting to do. I hope this will help. The closed State Network uses the computer web ...
Summary: Are you having problems with any of your other nics communicating at 100 when using the same port or twisted cable pair? Are all these nics the same m...
Summary: 100 Mbps = 12.5 MBps 10 Mbps = 1.25MBps More bandwidth charts here. That would be maximum throughput just on the wire (it's called theoretical capacit...
Summary: On WinXPpro or 2k3server (or at least LinuxFedora3), is there any way to configure software to use a specific NIC on the PC instead of selecting it au...
Summary: This is probably easy...Im a newbie. I have 2 Lynksys NIC's, one in Win2K the other Win95, connected with Cat 5. All needed protocols are loaded on ...
Summary: You don't say what the problem is, so I'll assume that it is that the nodes cannot see each other. If you are connecting via a direct cable from the ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
