Summary: Does anyone know how to find the IP of a managed switch (Netgear) on a W2k3 server network? Tried the DHCP, ARP, IPconfig and Firewall with no luck. ...
Summary: Hi All, Any thoughts on this one? I have a router which has had DHCP turned off and we do not know the IP setting of the router. How can I learn the ...
Summary: Many people new to computer networking have asked how to find their router's admin web page. Usually the advice is a bit complicated for the average u...
Summary: Ummmm... does anyone really read these things before answering them... I would like to know how to FIND the IP of a Cisco 675 with the MAC address. ...
Summary: I have a Belkin G wireless router, and both a desktop and laptop running Windows XP. The laptop was connected to the router (which was connected to my...
Summary: Well, you should know it better than I do that if you want to find out settings of a router, always it is not that easy. If you want to find the defau...
Summary: i have similar needs, since i lost the ip of a print server attached to the same switch of my notebook - and i have no MAC and no reset button on the ...
Summary: This is my view of a VLAN in a switched network, is it correct? In a switched network traffic destined for a specific MAC address will only go to the ...
Summary: I bought a "switch" made by Netgear thinking it was the same as a router? Am I wrong? There are 5 ports...the instructions are not thorough...left m...
Summary: Hello there, Does anyone know of a tool whereby you can ping all ip's on a network, and it returns the computer name?? I need to go around all PC's on...
Summary: Some ISPs require a MAC address to be registered but since you were able to connect each PC separately to the modem and have it work I don't think tha...
Summary: I would like to know the IP address of a yahoo chat user(spammer), while I am in any of the chat rooms. Most often I am spammed by unknown users which...
Summary: Well, blocking ports is a good thing. You only want to open ports for specific applications that need them. For example, to use Remote Desktop on a Wi...
Summary: I currently am connecting to the internet via cable modem. I am thinking of buying a router to split 1 IP address amongst 2+ computers. I am inquiri...
Summary: although you are using a router to connect your local network to the internet. Communication between computers in your home network is not routed but...
Summary: I have ICS working in my house sharing a dialup connection thru one of the PC. The host PC is *hardwired* via ethernet cable to the Wireless Broadband...
Summary: how would i find my ip address if i am connected to the net through a router... i am trying to set up an online game, but i dont know what my ip addre...
Summary: linksys routers are easily configured to forward incoming tcp/ip connections to whichever computer on your LAN. go into your router config util and c...
Summary: Is it possible? I have a BEFSR41 set up to three computers, one of which is using dns2go set up to redirect to port 8080 (because port 80 is pickup up...
Summary: If that does not work you can open a commnad prompt and type ipconfig and it will tell you the ip that you are connected to. That ip more than likley ...
Summary: I think you need to get more information concerning the TAP product. It makes no sense that you would need ICS or that your local ip range doesn't wo...
Summary: In that case, you'll want to use static IP addressing. Keep in mind, the cost of a hub or switch is about the same cost as the person above you that ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
