Summary: I have two 80mm case fans. How should I arrange them in order to maximise air circulation inside my case? (I can only use the two standard fan placing...
Summary: So i have an enermax case... I have 1 fan installed in tha back (Have room for 2 in tha back but only 1 installed) 1 fan on tha side, and one in tha f...
Summary: I have an asus a7v133 motherboard and on the mobo right next to the heatsink and hsf on the processor there is another little fan (i think its the bio...
Summary: I wrote this in response to your "high boot temp" post... "As for your fan arrangement, they should be in balance...CFMs in should equal CFMs out...or...
Summary: I have a question and its a little bit odd. I recently got a new case and it has a side blow hole. It is positioned right over the CPUS (Dual proc boa...
Summary: First I want to thank johnoh for the answer to my last post http://www.computing.net/cpus/wwwboard/forum/6779.html You were right. The p4 was not thro...
Summary: "if i include my PSU fan, CPU fan, video card fan and chipset fan that would make 11 fans all in all" How do you have all those fans arranged? I usual...
Summary: 25/40 for system/CPU temps are not that bad. I'm running a P4 2.6, 800 FSB (slightly overclocked to 2.8, 1.575 v), and my idle temps are around 25/36...
Summary: Im glad the the flame is over but my question seems like it hasnt been answered. :-(. I have never overlcoked and dont know who, I just posted a messa...
Summary: Your CPU temp is OK, but your system temp seems a little high. Ideally, the internal case temp should be as close to room temp as possible. Considerin...
Summary: my system is an amd xp2000+ running on a msi 6390 via km 266 board. I have just installed a hav-v81 coolermaster fan and a case fan. The problem is my...
Summary: Might be a capasitator or some other "small" bit on the motherboard heating up really slow. As heating up also wasting more power and not having enoug...
Summary: As 666 said, 52c isn't a bad temp. I guess I'm a little confused by what you mean by boot temp though. Do you mean you're booting a cold system, where...
Summary: My PC when running processor intensive apps like a virus scanner my laptop just shuts off.No warning everthing goes just as if power had been pulled o...
Summary: To Narvind: I think a good 430w will not only be enough now, but also will last when you add more power guzzlers in the future (gfx and CPU will only ...
Summary: The mobo temp is no problem but the cpu temp bothers me. I'd like to see it 10° cooler at idle and not over 60°C a full load. I suspect the heatsink/...
Summary: To response #3, I just last night had the same problem and it finally got so it wouldn't boot. I also have XP 2200 and a Soyo Dragon KT333 Ultra MB. ...
Summary: muahhaha u can get a 2.8GHz from a 2.1GHz Celly with a intel stock fan no problems I mean come on guys its Intel. Anyone getting a 2.4GHz i would exp...
Summary: Here's my case setup: Low front intake fan, top blowhole exhaust fan, high back fan. The problem is with the XP2100+ HSF. It's a big heatsink with a ...
Summary: My computer been locking up lately at random ti mes most of the time it lock up is when i play games that gooble up my ram and speed. Chances are i n...
Summary: I am a real novice to insides of computers; i've put the odd CD drive in, but I rescued an old DTI computer some months ago and have slowly been tryin...
Summary: muahhaha u can get a 2.8GHz from a 2.1GHz Celly with a intel stock fan no problems I mean come on guys its Intel. Anyone getting a 2.4GHz i would ex...
Summary: mrtncc55 What type of cooling are you using and how are you applying the thermal grease? Originally in was cooled by an OEM Gateway CPU fan. The probl...
Summary: "next I tried taking the heatsinc off my processor and scraping off the generic stock heatsinc compound, and I got some Arctic Silver on there" I bet ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
