Summary: Right now, i am experimenting with fsb jumpers. My fsb is at 100/200 instead of 133/266 and my cpu is running much cooler. My question is, if i have a...
Summary: my board has a jumper that has small text reading "fsb" if i change the jumper will i be able to use a processor with a higher bus frequency or overcl...
Summary: I have an Abit KT7A-RAID mobo. It is going in my second comp. The processor in it right now is an AMD Duron 750. I read on the Abit's site that it ...
Summary: this is the usual question of the AMD 2100+ being underclocked to 1500+. i understand that i shd change the FSB speed from 100 to 133 to actually have...
Summary: Hi all. On my Chaintech ct-9PJL MB there is a jumper to set the FSB. I currently have it set at default therefore the bios will detect my CPU's FSB ...
Summary: Hi guys thank you for the responses, I am not sure on a few things so please bear with me, you say to set my CPU:RAM ratio at 1:1, can you tell me whi...
Summary: Like I said, I have an ASUS A7N8X-X. I never even knew an A7N8X-XE existed until today. I'll see if I can find the manual & have a look. OK, just had ...
Summary: I don't know what to say. I think the board has no fsb jumpers so if you can't update the bios you are hosed. Sometimes the speed fields are disable...
Summary: Thanks leembo, 1st let me say that I'm a mild overclocker...I like to tweak a bit but I'm not a fanatic & I don't try to push things too far. I only ...
Summary: Most Intel chip set board will recognize FSB automatically, i.e. 66, 100 or 133 FSB. The question is, do you want to get a processor that your board d...
Summary: http://www.fic.com.tw/product/motherboard/1stmainboard_detail.aspx?model_id=107 You posted the specs on your board...how about the rest of your hardwa...
Summary: And how would I go about modifying the PCI speed? BIOS? Also...IF I shoot for 225 and increased volatge be necessary, would 2.9 or 3.0 cover it? Last...
Summary: AMD 2200+ Soltek SL-75FRN2 512 Mb DDR 2700 I've just made the mistake of overclocking my front side bus from 133 MHz to 166 MHz. Immediately after th...
Summary: I ordered a 2.8ghz 800mhz FSB processor for my 533mhz fsb motherboard. Will I still be able to use the processor I ordered and scale down the FSB spee...
Summary: its in the bios but you may have to dig around. I think its under Frequency/Voltage Control. The mobo itself has no fsb jumper, as you say. ...
Summary: have you checked the FSB jumper setting on the motherboard are correct, if indeed they have them? AMD Athlon 2500 @ 3200+ Abit NF7-S v2.0 512MB (2x256...
Summary: I was wondering i have an older dell computer the optiplex gx240 and i just ran cpuz. and the fsb:ram is 3 to 4. If the performance is better at 1:1 ...
Summary: You do NOT have an 3200+...that's why I suggested you use CPUZ to identify your CPU. If it defaults to 1600MHz (12 x 133MHz), you have a Duron 1.6GHz ...
Summary: mark, Sounds to me like a FSB jumper switch is not set right. Make sure that it is set to auto if you have one. Wish I could help you out more. YO ...
Summary: Your board is old & is based on a weak chipset. Don't expect miracles. Are you overclocking for the sake of the overclocking experience? or do you ex...
Summary: M: Normally you should be able to just change it back. I changed my Pentium2 350MHz to a Celeron 733 MHz a while ago and I just had to change the FSB ...
Summary: I hear the 2500+ is a great cpu to OC. I found an article that said it would run at 200x11, just like 3200+ at standard voltage without much trouble. ...
Summary: It would help if you gave the make/model of your board. Are you sure there isn't a FSB jumper? Asus A7N8X-X 1800+ @ 8 x 210MHz 512MB PC3200 Asus Ti420...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
