Summary: I'm running BeOS Personal R5.03, and it's working great, except for some known issues with my onboard sound (AC97, I'm aware of the problems with i...
Summary: My ethernet card in enabled and all but when i got in networking and i choose to add a ethernet card it doesn t show up what wrong ? i tried to add a ...
Summary: Well i found out that my ethernet card is not supported by beos its a linksys LNE100TX(v5) Fast Ethernet adapter is there somewhere that has a drive...
Summary: I currently use a D-link DFE-550TX ethernet card and whtn I boot BeOS there is no card displayed under Preferences>Network in the white area, although...
Summary: I am trying to setup my ethernet card under BeOS so I can access my LAN. I have a NetGear FA311 networking card, PCI. However, no matter how much I fi...
Summary: HI has anyone found a driver for the apple comm II ethernet card that will work with beos? I had beos on a PII for a while but want to run it on one ...
Summary: Hey BeOS junkies, this is one heck of an operating system!! As soon as I get these two problems cleared up, I'm junking windows down to a bare minimal...
Summary: According to the official Be Software, Inc. BeOS® Ready List™, which was last updated on March 27, 2000 at 15:55 UTC, there is no support for USB devi...
Summary: Depends on the way you access the line. If you can get a way to use an ethernet card to the ISDN adapter then you might get it to work. If you want...
Summary: I have a cable modem with Road Runner, and the Ethernet card they put in is a PCI based CNET Pro200WL. When I boot BeOS 5 PE, in devices it's listed ...
Summary: First you need the IRQ en IO adress. If you Have the installation disk for that card, sometimes there is a diagnostic program wich can tell you this i...
Summary: Maybe dano supports it limited if any. Two or three problems are your USB controller might not work in PE or Pro. The USB stack on PE didn't yet suppo...
Summary: I'm running PE 5.0.3 and I'm having some trouble getting my internet-connection to work. I'm connecting to the internet via a LAN-connection. I've set...
Summary: Yep it can run, but not sure for the pro edition. the only thing that i cannot make to work is my cnet "fast ethernet card 10/100" im connected to my ...
Summary: Pretty obvious... do this... start windows98. run "winipcfg" Select the ethernet card that you use to connect to the internet...>>> More Info.... mak...
Summary: I'm new to beos, and can't connect to the internet with my ethernet card. I have a card that was included with my HP Pavilion 8580c pIII 500mhz comp,...
Summary: Hi- I am running a DHCP Network at home with a four computer setup and Windows 2000 with Be 5 Personal Edition loaded. I loaded the software and work...
Summary: Yes it's mostly anoying . i've finaly got my Compaq armada up'n running with BeOS but now the only thing i cant get right is the network , I have a "A...
Summary: I just try to install BeOS Personal Edition 5.0.1. My system is Win2000 on C: with NTFS and D:, F: and G: in with FAT32. Since C: is almost full, i in...
Summary: I have a sound blaster 128 PCI and Iwould just like ot know how to make it work in BeOS I also have an adsl connection that uses pppoe (i found the dr...
Summary: Well, the issue is that the network at my school has variable IP addresses, so it is impossible for me to specify one. In the devices menu it lists a...
Summary: I solved the problem...a Xircom Cardbus Modem/ Ethernet card. There was probably a conflict of resources somewhere. Perhaps BeOS was trying hard t...
Summary: Do any of you currently use AT&T Broadband and BeOS? I am trying to connect to the network, but nothing is successful. BeOS completely recognizes my 3...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
