Summary: Question 1: Could the error message you posted be a typo for: Error 0701: USB Port Current On Hc/port ? Question 2: Do you have anything plugged into...
Summary: I started my laptop and it automatically went to the a screen that has the following error messages: 0701: USB Over Current On HC/Port - Bus:00H Dev:1...
Summary: Problem: I can no longer run the computer with USB 2.0 controller enabled through the BIOS... the problem started suddenly about a month ago when i t...
Summary: i orignially posted with a usb over current bios problem, i was able to stop the halt in the bios by selecting not to halt on errors, installed window...
Summary: I have a 320GB WD Passport Elite external USB drive. Previous to that drive I had a 160GB model which always worked fine. This drive itself initially ...
Summary: Sounds more like something is shorted out some where. The fans run on +12v. When you try to power on the system, the power supply puts out the voltage...
Summary: None of my usb ports work on my d975xbx. Under universal serial bus controller in device mananger, all the host controllers have a yellow exclamation ...
Summary: Ive searched all over the web and i finally thought id check in with u guys as you usually help :) I have a camera that uses a usb cable.Now there was...
Summary: Follow the directions for installing the external drive. E.g. Some external hard drives have built in backup capability or other hardware or software,...
Summary: The 6000Z system probably has a ZZ TOP socket A (462 ) mboard. ZZ TOP mboards were made by Mitac for Compaq - lots of older Compaq mboards were mad...
Summary: Oh, I forgot to mention that the past 2 weeks, some of the USB ports have not been working at all. My jump drives are detected but when I try to open ...
Summary: USB also relies on your CPU to drive it, so heavy paging on an external drive will soak additional CPU cycles. So to answer your question of if it's w...
Summary: I have 2 Gateway computers and the same behavior happens on both. They have 5 USB ports - 4 on the rear and 1 on front. If I plug something into the...
Summary: You have not said if these were PS/2 keyboards/mouse or USB attached. Could make a big difference it what might be suggested as problems, otherwise al...
Summary: i am trying to create a bootable cd for my usb cdrom. boots up fine goes to my menu then load the aspi correctly but then give me the following error...
Summary: I have got this error several times when turning on Computer..........I have no floppy in my disk and do not have it booting to floppy A..... Error is...
Summary: I have 2 USB Port connectors on the Shuttle AK32 MoBo. I want to use 2 more Ports by connecting a USB Cable (with 2 USB Connectors) to the Extended JP...
Summary: I was moving a large amount of files within the hard drive using usb 2.0. So the files get done moving, and i try to see the folder so i can get rid ...
Summary: Your cables from the front USB have the connections in the right order for your USB header on the mboard in the same order as you have typed them. Jus...
Summary: Hi, Do you have any USB errors in Device Manager or any yellow explanation marks. Are the chipset drivers installed for your motherboard. Is the devic...
Summary: USB ports supply +5v on one of the connector pins. If it is not there at all, then something shorted it out or overloaded the +5v and damaged it. Kind...
Summary: I'm looking at buying the following: Western Digital 80GB Passport External USB2.0 2.5 inch Hard Drive Will this work on my pc that is usb 1.1 or will...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
