Summary: Bers - I appreciate the ideas. However, because of certain legacy softeare being run still, a lot of people require Admin rights on their pc's. Becaus...
Summary: I got 2 Linksys routers...ive got one connected to the other....the router connected the my modem is working....but the other one isent...is it even p...
Summary: Thanks, I checked SMC and they dont have anything nor do the other router companys, so i think to avoid the cost of 300-400 bucks on a dual router. I ...
Summary: Hi, I have been reading alot about dual router setups on the internet but im not quite sure if i have the right picture in my head on how to do it. I ...
Summary: I have my home wired for DSL (AT&T). In the process there were two locations that DSL connection was installed. I have always only used on of these ...
Summary: Hello. I currently have a wired home network consisting of 2 pc's and a 4 port LinkSys router connected to a DSL connection. I'm in the market for a...
Summary: Hey guys, new to boards here and after hours of searching this seemed like a good site to post. What im trying to do is share my internet connection o...
Summary: I have the WRT320N setup with Several devices on it's wifi. I also have an Xbox 360 plugged into it. I need to run a cable down the hall and us the WR...
Summary: Since it is a dual wan router there is only one gateway and that is the ip address of the ethernet port of this dual router. You would have to go into...
Summary: FBI Agent is RIGHT! I use Charter Pipeline here in Rockwall, TX. I have over 20 years networking, server and PC experience. From August 13th through ...
Summary: in an earlier post by someone else a suggestion to his problem was to get a dual input/uplink router/switch. does this herdware exist? if so who mak...
Summary: I recently aquired the dual port router from the company ZOT www.01tech.com model AF420B I was looking into the Nexland 800 series and found this one ...
Summary: I have two windows Vista PC's. one of it say Apple has dual NIC cards. One card is connected to v4 network and another one goes to a v6 router (basica...
Summary: in an earlier post by someone else a suggestion to his problem was to get a dual input/uplink router/switch. what i mean by this is for the switch to ...
Summary: I can connect my pc directly to the modem, and it works, but through my netgear router, it does not work. Is there a sequencing that I need to. I have...
Summary: We bought a new router for wireless networking but when we plug in the line from the phone jack, the router detects no connection also, which is very ...
Summary: I am using raodrunner cable. I am using this with a router with nat which than goes to a smc hub that feeds to 3 other computers. All this works fine ...
Summary: Well there is a reason or I would not of asked the question. The second router would be a dual WAN port router with 2 incomming broaband internet con...
Summary: Hi, I am dual booting Win XP Pro and Win98SE, Verizon DSL service, and just got my Linksys Cable/DSL Router (BEFSR41) in the mail today, and i have sp...
Summary: I have 4 PCS, all networked together (100mb - all Netgear products), all working fine. All my PC's have their own internal 56K Modems and each runs No...
Summary: By necessity, if you want them to all communicate, you need to have them on the same subnet. Yes, you can ignore the wan port and make a PC the serve...
Summary: A router would be preferable yes. A switch doesn't offer NAT and firewall which a router does. If you can't take the product back and exchange it on ...
Summary: I have 3 computers. On my main computer I have Battlefield 2 which requires more ports to be forwarded than my router can handle so I need to bypass t...
Summary: I don't know what the deal is but I can't get my TRENDnet TEW-611BRP router to work with classic mac os. I have tried it with MacOS 7.6, 9.0.4, and 9....
Summary: I have the following setup: Internet -> Router -> Windows 2003 Server (2 nics) The Router has fixed IP and configured as: WAN IP: Fixed SUBNET: ISP As...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
