Summary: Just stumbled upon this site. This question may have already been answered, so please forgive me. I have a 4GB drive that I want to dual boot 95 and...
Summary: You can install 95 on an NT system. First you have to install dos. Then you have to boot the system with the NT setup disks and repair the boot sect...
Summary: If the windows NT installation is FAT16 (which it should be if it was pre installed) then you should be able to boot the machine with a Win95 boot dis...
Summary: Taylor: http://www.ntfaq.com sounds like a useful place for you to now about, (John Savill's excellent NT faq site...) especially the Intallations sec...
Summary: Install '95 first in to one partition; this will be FAT16 by default, limited to 2Gig max. If you have OSR2.2.1-2.5 you can chooose to install as FAT3...
Summary: Hi, I am currently running windows 98 and windows 2000. I need to install NT also. What will happen if I install NT over windows 2000? Will NT recogni...
Summary: http://www.computing.net/windowsnt/wwwboard/forum/10855.html gives you a way to do it (from scratch). As you already have '98 as FAT32 on HD-2, discon...
Summary: Hi! I am trying to set up a dual boot with NT 4.0 on my master drive and Win98 on my slave drive... I have a FAT16 boot partition on my master dri...
Summary: Stefan is pointing you in the right direction generally. Critical item for dual-boot NT/'9x is that the system (active primary) partition has to be FA...
Summary: It is possible to Dual Boot NT server and Windows NT Workstation in the same system. insert Winnt WS CD on Windows NT Environment. Install Windows NT ...
Summary: The core/basic requirement for dual-boot NT/'95 or NT/'98 is that the active primary partition (the C: system partition) is FAT16. This is where all M...
Summary: Gordon seems a little eager for you to purchase more software when you don't need to! have 2 hard disks, or 2 partitions. Format the C drive/partition...
Summary: first: you cannot dual boot NT and 98 with fat 32 if you want to dual boot with NT, the active partition must be fat 16: 1. install 98 fat 16 on the ...
Summary: I'd like to dual boot NT and win98. Does this mean that i have to install all of my apps twice? Does winNT recognize fat32 partitions? Don't i need...
Summary: Here's the problem. NT out of the box can only install to 4gig. ONLY. This is the max! Now you can try the atapi.sys routine. I have had it mostl...
Summary: It sounds from your info that C: (active Primary) partition is ntfs? If so then no way '9x will dual-boot with it. Much as Michael suggests, probably ...
Summary: Hi, I have read most of the previous mails on dual booting NT4/Win98 but have not found a suitable solution to my case. I have preinstalled Windows 98...
Summary: I have a dual boot NT Server 4 / Win98 (AMD K62, 20 gig HD primary HD, 20 gig secondary HD) and continually have problems when I cut/copy and paste fi...
Summary: That's what is kind of screwy about NT and 95/98. Only Win9x can read FAT32 and only NT can read NTFS. The only common medium is FAT16 which limits ...
Summary: im sure when i dual booted with 98 before i installed 98 first and then nt. but now if i try to do it in that order when installing nt it says that it...
Summary: Hello, this is a two part question actually.. I have a Compaq Prosignia 500 with 64 MB RAM, 2 SCSI hard drives (C: is 2 Gb, D is 1) with Windows NT 4....
Summary: Right, I'm trying to dual boot win98 and NT 4.0 beta 2. I can't put them in the same partition since it seems win98 automactically formats it to FAT32...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
