Summary: My drivers I installed with the emergency boot disk in dos work in dos with the cd-roms but not in windows 98 and when i start win98 everytime it says...
Summary: Realtek drivers dont work in win98 DOS Mode... Network support only available in windows mode, but not in DOS mode. Says that the driver is missing, o...
Summary: After I installed Win98 my CD started to misbehave. It cannot seem to read software disks properly any more. It hangs and makes noises. I also suspect...
Summary: Installing the dos drivers in config.sys and mscdex in autoexec.bat doesn't necessarily force a ms-dos compatibility mode. At least it hasn't on any ...
Summary: Torisan site is here but it doesn't list that model. http://www.torisan.co.jp/cd_rom.htm If you've connected it right windows should recognize it anyw...
Summary: Try booting using a Win98 boot disk from www.bootdisk.com If it loads drivers for the cD-ROM and it works in DOS mode after booting with the boot disk...
Summary: Help! I am trying to update a driver for my cd-rom, however, I keep getting the message mscdex.exe not found. I have now downloaded this and I am uns...
Summary: "Good or bad, i've never had to install a cd-rom. Shouldn't be much of a problem if you've ever seen the innards of a PC: http://www.fonerbooks.com/r_...
Summary: Hi If you can't use a bootdisk, with the win98 disk in the cdrom, choosing, with cdrom support, you probably have to get the driver for the Mitsumi dr...
Summary: First of all, this is the Win 9X forum. There is a Linux forum here on the site, you should post your message to. As you know, Linux is an open syste...
Summary: I am writing this in favor of my father. He has an old 233Mhz pentium. Along with that he has an old Torisan 4x cd-rom in which has no model number in...
Summary: yep.... type "woofs windoze page" in www.google.com and download the "universal atapi/ide cdrom driver" and run the program and reboot...your cd rom w...
Summary: I have an IDE connection that goes from my hard drive to my CD-ROM drive then to my mother board. I recently installed Windows98 and I got it to work...
Summary: I am one of the "pirate" types that posted in the "Not a pirate" post. I burned several CD's...(maybe one is Win 98...shhh)to find...that, at least w...
Summary: FIXED THIS ONE> Compatibility mode drivers were loaded. Deleted all drivers for CD rom and IDE drivers in system manager, and reloaded. Now works O...
Summary: DAVEINCAPS: Back of CD_ROM has 3 wire connectors. 4 PIN is power supply Thin 3 wire (Red, White, Black) connects cd-rom to sound board? 40 Pin? conne...
Summary: Hi Steph. Are you reinstalling Win 98 because you are stuck in Safe Mode? Try running Scan Disk while you are in Safe Mode. It might fix the problem ...
Summary: Yes indeed there is. Here's how: Start > Settings > Control Panel > system > device manager > double click the cd rom > settings > click in the check ...
Summary: I have a Philips CD-RW which has been working fine until last week. If i check device manager no Cd-Rom is displayed. In the Bios the CD-RW is detecte...
Summary: If you install a dos driver that is loaded by config.sys then the cd rom will work in windows explorer but will not show up in system devices. In perf...
Summary: I have recently formated my hard drive and have re-installed Windows 98. My CD-ROM works fine in DOS but when you boot the computer into windows it ma...
Summary: Unless you have a really old CD-ROM drive with a proprietary interface, you shouldn't need to use a driver for CD-ROM drives as that Windows 98 uses i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
