Summary: Hi all, I've switched to XP and set aside my IBM. It has no burner. I pulled A cd-rom burner from an XP desktop with a fried motherboard. I would lik...
Summary: Help! I am trying to update a driver for my cd-rom, however, I keep getting the message mscdex.exe not found. I have now downloaded this and I am uns...
Summary: I am writing this in favor of my father. He has an old 233Mhz pentium. Along with that he has an old Torisan 4x cd-rom in which has no model number in...
Summary: I'm trying to install Windows 95 but can't get the system to recognize my CD-Rom...where would I go to get the drivers (I guess that's what I need to...
Summary: DAVEINCAPS: Back of CD_ROM has 3 wire connectors. 4 PIN is power supply Thin 3 wire (Red, White, Black) connects cd-rom to sound board? 40 Pin? conne...
Summary: It's possible this is a Win 95 issue but in the past I sucessfully used at least 3 different burners under 95 and I know of many others who did simila...
Summary: My drivers I installed with the emergency boot disk in dos work in dos with the cd-roms but not in windows 98 and when i start win98 everytime it says...
Summary: With old 2-4 speed Cd.Rom, that requires to connect through Sound blaster 16PRO, I'd like to be able to access from DOS. Can you provide me with Drive...
Summary: Do you have a soundcard with DOS drivers installed? I had the same problem with a Soundblaster Live Card. I have disabled the SB16 emulation hardware ...
Summary: Try booting using a Win98 boot disk from www.bootdisk.com If it loads drivers for the cD-ROM and it works in DOS mode after booting with the boot disk...
Summary: FIXED THIS ONE> Compatibility mode drivers were loaded. Deleted all drivers for CD rom and IDE drivers in system manager, and reloaded. Now works O...
Summary: My CD-ROM did work before...The problem is that after something the CD-ROM just stopped working! And the CD-ROM used to attach the cable to the sound ...
Summary: don't give up looking for driver for CD rom Try different bookdisk till you find one that works try this one http://www.fastlanecomputers.com/disk....
Summary: Sometimes older device drivers for cd roms had to have the address and irq specified in the config.sys line that called the driver. Newer drivers sho...
Summary: If you reformat and re-install, all your patches will be gone. Never install drivers for CD ROM's unless you need to access it in DOS and then you can...
Summary: Hello Friends, My question is about CD-ROM. I tried to install driver few times but the system says i am not installing write driver for the system. S...
Summary: Are there universal drivers for cd-rom drives. I don't have drivers of my cd-rom and i suppose not all drivers will work on every cd-rom drive? ...
Summary: Unless you have a really old CD-ROM drive with a proprietary interface, you shouldn't need to use a driver for CD-ROM drives as that Windows 98 uses i...
Summary: I installed a new motherboard, cpu, and hard drive. Upon startup with boot disk, cd-rom not recognised. How can I install the drivers for cd-rom, wh...
Summary: Hi, I just reformatted a friends computer, but afterwards I noticed that it says: boot record for cd-rom not found boot record for floppy not found B...
Summary: Hi, Yes, in that case I have already PCMCIA card services installed- from CardSoft. Thanks. However, do I need Driver for PCMCIA CD-Rom to function un...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
