Summary: I installed a new mobo last week. I have 2 IDE Hard Drives- both of which are bootable. These are correctly configured as Master as Slave to the Mobo ...
Summary: Hello everybody! I am tryng since 8 days to make my mouse works in XP pro.My mouse work on another computer.i have 3 usb mouse which are detected bu...
Summary: ingredients: ide mobo; ide hdd (20Gb); sata hdd (1Tb); sata/ide interface card (via) + cables (data & power). connect all & switched on. How do i make...
Summary: When I tried connecting my Hitachi external drive (USB1.1), Windows displays that the "USB Device is Not Recognized" and the Device Manager lists the ...
Summary: Apparently your mboard is a desktop model SocketA KT600 ATX DDR400 AGP 5PCI SATA Sound LAN I'm assuming you HAVE NOT changed which ram you have insta...
Summary: Check your boot device sequence in the bios. Set the order to A (floppy) first, then CDROM, then C (1st HDD). It may be set to C first and the POST is...
Summary: Sticksy, I also had the same problem with the Seagate 250 GB drive. In the beginning it was working and I had used for around 1 year. But recently m...
Summary: I have been having problems with my Gateway Laptop's CD/DVD burner: it reads disks fine, but it doesn't write properly. I got one single disk written...
Summary: Jack, Your problem may seem strange but its caused by a small circuit known as the AGC, or automatic gain control. It's used to boost laser power due...
Summary: Hey everyone. Thanks for taking the time to read this. Here's my problem. I'm trying to boot up my computer, but when I do, I get this error saying "...
Summary: If it is dirty it will usually read some times but not others. Also, there are different color laser out there that read different colored DVDs so you...
Summary: Depending on which SATA header on the mboard you have that hard drive connected to, the drive must be jumpered as master or slave, as well as, in your...
Summary: If you made a typo or mixed things up and this applies to Vista and not XP: "I can burn with Nero 8 in XP with no problems." Whenever you load or re-l...
Summary: I'm having a problem getting my computer to detect my DvD and CD-RW drives. Currently both the DvD and RW are on the Secondary IDE, the DvD is slave ...
Summary: Help, i am helping my brother and can't solve his problem. He was closing windows and messed up the way files are opened. he has a c drive, my comput...
Summary: HI, So I tried to format a floppy under ubuntu and it took for ever and never did work. So I assumed the OS so I cause formating under linux has alway...
Summary: Hello folks, I recently wiped a spare IBM SATA drive of FreeBSD in order to install a fresh copy of Windows on it. The SATA drive, along with my CD dr...
Summary: i have searched these forums and there are similar problems to my query but not the solutions i was looking for, so please someone HELP me. My Query I...
Summary: Older mobos (pretty old ones) often require that you set the hard drive up manually. If your bios has the "auto detect" function for hard disks, then...
Summary: Hi I have a Pentium II,333MHZ and am trying to install a 40GB hard drive. It gets detected as slave no problem but when I set the jumper to master it ...
Summary: Information: I'm using a Micro Advantage DVD±RW 16X Superdrive to burn data CDs to backup my computer. It is set to slave while my DVD-rom is set as ...
Summary: The messages you are getting are normal if the computer bios is not finding a bootable disk for some reason. "The message you firts mentioned is usual...
Summary: A working Master Samsung 80GB Hard disk running WinXP was installed as a slave in another computer for data transfer. The HD was wrongly jumpered to ...
Summary: Hi everybody! I have purchased a brand new 750gb sata hard drive today, installed and connected it to my Asus A7N8X-E Deluxe motherboard. However, dur...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
