Summary: Hi all, I'm shortly going to try and fit a Duron 1200 in a Shuttle AK31 mobo. I've not done this before and don't want to arse it up. Will I ne...
Summary: I am building my own PC and want to purchase an AMD FX/51 with the heatsink and fan attached. Do I need to connect this to my motherboard using therm...
Summary: I purchased an OEM AMD Duron cpu earlier this week and have 7 days to return it. Their return policy states the item must be in the same condition th...
Summary: I have my P4 2.26 processor and Ive been underclocking it because of my motherboard wont let be put the mhz past 400 (which my processor is 533mhz) so...
Summary: Hi Novice here building my own PC. Is it usual practise to use thermal paste between the cpu and cooler today, even on the modern AMD athlon processor...
Summary: plyduster, I did site search and there is many posts regarding how to add thermal paste and other questins about thermal paste but I cant see any abou...
Summary: I have a PIII 866, 256 megs of ram, ATI Rage 128 and a 30 Gig hard drive. I have one fan/heat sinks on the CPU and one fan on the power supply, there ...
Summary: I'm thinking of buying a new mobo and cpu after mine blew. If i get a 949 athlon 3000 or 3200 do i need new ram. i've got 768mb ddr 333. If i do, th...
Summary: ps. I would like to over clock a xp1900 on a msi kt3 ultra mobo. I am also new to all of this. Do I need to unlock the cpu, or can I just use the fsb...
Summary: what do i need for serious multitasking in a computer? I dont play games but I do need performance when I quickly multitask between programs. I use O...
Summary: ive ordered a new motherboard and im going to swap out all my components. my question is do i need to get thermal paste for my processor and hsf unit?...
Summary: I recently bought a new heatsink/fan. I touched the bottom part of it where the thermal paste is and i smeared a little part of it. A small part of ...
Summary: Hello Guys! well i think i need an exorcist for my pc! whenever i start up i get a keyboard error and have to re-boot until it works... then i have to...
Summary: DO i really need that 12v ATX connector to my new p4 mobo???? is it necessary??? and where can i buy an adaptor if it is the case where I need to use ...
Summary: in need to remove the heatsink off my cpu so i can identify the chips specs on the intel site but the heatsink is like looks like its made onto the cp...
Summary: thanks a lot for your information. jam so far i can make it to 200mhz faster by increasing cpu freg to 240, when i increased it to 250, i was getting ...
Summary: Hello, Can anyone help me to get the full speed from my computer, what do i need to do? How do i increse the FSB etc Can anyone help? Regards Mush ...
Summary: Anyone? :o/ My HP Pavilion 4455 PC motherboard is fried, from a lighting strike! What type of motherboard do I need to replace it and upgrade it? At t...
Summary: ok so i have a 3.0 p4 and i want to overclock it and my ram is 400fsb so i need to buy pc 3500 or even 3700 to oc the cpu or can i get more out of thi...
Summary: Hi; You shouldn't really have to periodically replace the thermal compound between the CPU and the Heatsink/Fan, unless you take the two apart for som...
Summary: I have 1 gig of kingston hyperX 2700 ram. My mobo doesn't allow me to adjust my voltage settings, but will let me adjust the FSB. When I take it pas...
Summary: ok bare with me i no this is going to sound like a noob question what do i need to put in the mainboard: g.p.u. c.p.u. r.a.m. r.a.m. slot/expantion sl...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
