Summary: I have and old Micron system, and I am installing a 40GB drive. The bios/motherboard does not support drives over 8GB, so the drive comes up as 8GB, b...
Summary: i cannot get the cd-rom drive to load on boot so i can install windows nt is there any way i can install it with in windows 95 running when i get to t...
Summary: I have a Dell Latitude laptop that will not boot. NT was just loaded on the drive. After the OS loader runs and the NT boot screen appears the laptop ...
Summary: I have NT 4 running on several HP Vectra (PIII, 64 MB RAM, SP6). They will not boot past the NT boot screen. I have tried the HP restore CD (it runs...
Summary: hi, i have a dell 420 workstation using NT 4 servace pac 5 duel 16 gig scsi harddrives no raid os is on a fat32 and there are 2 nore ntsf prtitions. 3...
Summary: It is more than likely the problem is, that read write heads on old floppy drives become misaligned with wear and tear....but they still seem to funct...
Summary: I have been having so much trouble with this old Matsus---a-Kotobuki cd-rom! I have to right driver for it and the Golden Sound Card it's daisy-chaine...
Summary: A problem with mapped drive letters on nt server: When NT-Server is started, it has two mapped drives. This is ok. After an undefined time there are a...
Summary: Hi Folks, My WIN NT Server also doesn't boot to the Admin log on. It is freezing at the blue screen. My server is Micron NF6200 and all HDDs are SCSI ...
Summary: I seem to have come accross a problem that I cant solve at the moment. I'll just fill you in on a few things. HDD 8.6 Gigs Partition 7.6 gigs C drive ...
Summary: In order to dual boot you really should have Fat16 in the first partition. NT setup automatically places boot files on the first recognizable partitio...
Summary: Hi Nitish, Somthing that may have happened is that you have created two primary partitions. If this is the case drive letter assignment priority goe...
Summary: Is your Windows ME able to read the D partition? Perhaps a little search for a bios upgrade might not be a bad idea either. Also, if this D-partition ...
Summary: Hi jared, i had the same problems and i don't think it's the size of your boot partition. I heard that the problem is, that after installing a service...
Summary: If a dozen workstations with no hard disk drives boot from only a network connection, supplied from a single server machine running NT4 Server, what e...
Summary: It won't matter if you use FAT16 or NTFS, although security and permissions will only work in NTFS. NT will only recognize 4 gig partitions. It is ...
Summary: compaq laptop win NT. started fdisk and format and forgot to make boot disk but have win98 boot disk tried this but no responce. i am trying to instal...
Summary: partition your hard drive using dos. make it dos bootable. after that try to install win nt from the WIn NT CD ,there while installing it will ask u f...
Summary: I'm getting this message on boot: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. Tried booting from an NT boot disk, but get the "Non-system d...
Summary: Well on newer computers the bios will automatically detect the IDE device, provided you have the master jumper on the CD/RW selected and the middle co...
Summary: I did this with no problem but on a bigger hard drive which you may need. fdisk your HD and create a primary partition just big enough for NT4, make s...
Summary: I have a similar setup . Here is the solution I use. If you have both your hard drives configured correctly you can enter the CMOS setup when you co...
Summary: Two simpler solutions: 1) Simply install NT three times, once on each drive. Edit your boot.ini file to give custom names to the menu options. 2) More...
Summary: Data server (also bdc) loses its share permissions on its drive when it is taken down and booted. How can I get it to "share" automatically on re-boot...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
