Summary: We have a unix server that I need to clone the hard drive. There is no way to get a similar sized hard drive. Are there any options here? I am an M...
Summary: I have a similar problem. I have network stations that use a compact flash instead of a hard disk. You install a dos formatted CF and set up the stat...
Summary: Any help with the problem below appreciated. System running SCO Unix 2.1.x with 6.2Gb hard disk. Requirement is to add a 9.2 Gb hard disk, copy ever...
Summary: Using 10.20 on HP 715/50. Trying to do a fresh install. 2 internal drives connected via scsi (5( and (6). During bootup it queries drives and states....
Summary: Hi, new to SCO/UNIX... I am trying to clone a 520 mb SCSI drive (that has software load), so when the operators of the equipment crash the software, I...
Summary: Hello, i am an absolute novice to system administration and handling somebodys elses work temporarily. we have a problem in our lab, One of the machin...
Summary: Hi, I am unzip a file 3GB in AIX 4.3.3. The file system is setting big file size "yes", but when attain 2 GB, message error disk full. Help. tia. ...
Summary: I have two hard disks, one with unix 5.0.0 and other with WINNT installed. Is there any way that I can boot from any hard disk without switching hard ...
Summary: It's been several years since I used Veritas, but I believe the steps are: Use vxmake to create a sub-disk. For help, type vxmake help. Use vxsd to a...
Summary: Hi... I try to install SCO UNIX 5.0.5 in my Laptop. Middle of installation loading ram disk image fd(64)rootFS then Memory excessively fragmented (inu...
Summary: We are a Scandinavian Data recovery company and would be gratefull for a little advice to help us assist an SCO Unix user in difficulties. We have suc...
Summary: Hi, Just wondering if anyone has any ideas on cloning an IBM, I'm new to Unix and have never had to do this before. I need to clone an rs6k running ...
Summary: Hi, I want to write a script which basically monitors the amount of file usage (%) for a specific file system ,say "/mount1" for a amount of %,say 98%...
Summary: So i have a problem mounting my first hard disk,i have wd0 and wd1 and when im going to mount wd0 with mount /dev/wd0c /mnt it said Inappropriate fil...
Summary: hi every body.. I have bad experiance with my system AIX 4.3.3 and I must restore from tape backup system, and I need much time to complet restore sys...
Summary: Could someone please tell me the cod eto list the total disk usage for a certain user on a unix system. I think I might need to use a pipe but am unsu...
Summary: could you just guide me how to install 2nd hard-disk and mount the file system on to sco-unix 5.0.5. please give the step-by-step procedure. regards s...
Summary: Help! Trying to load SCO Unixware 7.1.1 on Poweredge 2400. Cannot find root disk. Hardware is good because I can load Win2K Server. Drivers? Setting...
Summary: Hi everyone, I appreciate any help in this matter, I posted a message earlier, about capturing the exit code from the perl script(sub script) in the ...
Summary: i can`t start squid because the cache is in use with 100%. /var/log/messages said canīt write to disk. I need a command to safty clean the chache i se...
Summary: Help please! I have got a used printer "Starnx 1000" and I want to install it on my computer. But the Windows 95 soft wear on the computer is incomple...
Summary: I have a Decunix4 machine and I have a problem with hard disk space. I also have lot's of PC in local network. Can I use one Pc and mount it's hard dr...
Summary: solaris 8 requires 64mb ram . and intel processor . also cheque if u disk is master slave or secondary . u need u adjust u jumpers to have it as maste...
Summary: Hello, I was wondering how abouts I go to install a 250mb Zip Disk drive under OpenBSD 3.0. I need it to back the system up. Any help would be greatly...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
