Summary: I was just given an HP DeskJet 660C color inkjet by someone upgrading (?) to an iMac. It might be 7 or 8 years old. She only used it once in a while t...
Summary: Ihave a h-pofficejet(t-45) printer\fax\scanner\copier that is only printng b\no color, theres a new color cart. in it.it copies color\no print thanks ...
Summary: i have a hewlett packard deskjet 660c and the problem is when i print in colour it doesnt have any colours coming out so its probably an empty cartrig...
Summary: My HP DeskJet 890C printer only prints black and pink color. I've replaced both cartridge and still the same. I checked make sure that the drivers a...
Summary: I just installed this card and I dont have the color red appear on the screen. Any time there is supposed to be red there is a light shade of black i...
Summary: I really need some help with this matter: I recently installed Windows XP Professional on my sisters computer. She use to have Windows 98. At some po...
Summary: Didn't you just read the stuff above? When you have no color in windows, it's because windows doesn't know the EXACT type of graphics chipset that you...
Summary: First let me say that this is a double post for all intents and purposes. I posted this on the XP board, but I have NEVER had any luck getting any rep...
Summary: I RE-formatted a Win98 PC and installed Win ME. Everythings so far has worked OK except the printer now only prints black. Yellow does not print at al...
Summary: Are you using S-Video? If you are, try a different cable, the color pin may be broke. If using composite, make sure it is set to composite. ...
Summary: My HP deskjet932C suddenly stopped printing in color. Have replaced cartridges, checked settings but still no color! What could be the problem?? Hel...
Summary: my imac G3 desktop lost color on my screen. it had been turned off and unplugged for awhile. I turned it on then no color at all. it's all black & whi...
Summary: I just got a "new" Tv...(Sanyo 33´ 50Hz something around 1994) and when I plug my geforct in it there are no colors....only black and white!!! The mon...
Summary: Hi, If your cable has Colored Coded connectors then it is CS (CABLE SELECT) and blue goes to the MB, Black to the "MASTER" (Name not jumper) and Gray ...
Summary: One more thing.You might try putting a video card in the pci slot.I noticed with my HP pc with intel on board graphics that if i put a pci video ca...
Summary: The 80 wire cables have finer wire. For the most part they have color coded ends. The older 40 wire cables are coarser wires and no color coding. T...
Summary: Hi guys!... There was a power failure yesterday, but my systems were not affected since there were UPS's installed. This morning, I tried to boot up m...
Summary: Lightscribe - oh man it takes 36 minutes to burn full label with graphics when set to best quality - all in grayscale only no color - oh man. i_XpUser...
Summary: Hi, Cable Select cables have color coded connectors and both drives are to be jumpered CS. Postition on the cable does determine which is C: and which...
Summary: The neighbor knows I poke around with computers and asked me to take a look at his, and update it to SP2. It was randomly locking up. Went through a...
Summary: Hi, Some CS cables do not recognize Master/Slave. If the connectors are color coded then Blue is MB, Black is Master (C:) and Grey is Slave (D:) etc. ...
Summary: Hi, Are you using a CABLE SELECT (CS) Cable. It would have color coded connectors. Blue goes to MB, Black to the Master and Gray to the Slave. Master ...
Summary: That is one very old card. The 9 pin connector is for monochrome (no color) video. As for the dip switches, they set the mode you want to run the c...
Summary: if the computer can send accurate color and image information to an external monitor, that would suggest that the laptop graphics are fine. i could be...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
