Summary: I am trying to wipe out and rebuild my daughters compaq/dektop. i have been able to delete all partitions except the primary dos partition. when i go ...
Summary: I am trying to get rid of everything due to an accident , and try to install win 2000 pro from the begining. When I get to set the Primary DOS Partiti...
Summary: Go to www.bootdisk.com and downlaod a program called DELPART and put it on a floppy. Run it after you boot up with your WinME boot floppy. Sometimes F...
Summary: Use a 9x or ME start up disk Boot to A: Fdisk Delete Partition or logical drive Delete primary DOS partition Next Create DOS partition Create prima...
Summary: using a win-me startup disk type fdisk, you will need to fdisk and choose large drive support, then delete primary dos partition,then add primary dos ...
Summary: Using the boot disk, boot up the PC and then type FDISK. When FDISK comes up hit Delete Primary DOS Partition. It will ask you to enter volume label, ...
Summary: you will need to boot with a win-me startup disk, at the a: type fdisk choose yes for large disk support then delete extended partition then delete p...
Summary: hello you need to fdisk and partion the drive and than reformat the drive. Even though it does not really apply, since you're trying to lose all your...
Summary: I tried to reformat my hard drive using the FDISK command, and when I got to the part where u select -Delete Primary DOS Partition-, it wouldn't let m...
Summary: boot with a startdisk at a: type fdisk choose large disk support for fat32 and partitions over 2gig. then delete extended partitions then delete prima...
Summary: I wrote this for somebody else, but you should be able to find the answers you need here too: PART ONE 1) Create a Windows Startup disk in Add/Remove ...
Summary: I started installing red hat 7.1.2 onto my 99 compaq 5220 and the second cd didnt work and my computer restarted. I tried to put the compaq quick res...
Summary: OK......... Use the EBD that you created. Put it in your floppy drive and turn on the computer... At the boot menu use the arrow key and select "Start...
Summary: simple format isn't enough after using wipe ,with startup disk at a: type fdisk choose large disk support delete extended partition delete primary do...
Summary: that would be format c: after format is complete and if it formatted to the correct capacity e: setup if it formatted to the wrong capacity you'll ne...
Summary: When i want to remove windows me to install xp i use fdisk from a windows me startup disk to delete the primary partition. Then i partition/format ntf...
Summary: sounds like a harddrive crash,while running defrag. using a win-me startup disk type at a:sys c: hit enter if you could run system restore and see wh...
Summary: You need to FDISK it before you can format C: Here are some notes I copied from the net but made a few amendments to simplify things. This is for one ...
Summary: I had this nightmare just two days back and after multiple emails back and forth to the compaq guys and well as no sleep they finally sent me a soluti...
Summary: use a win98 bootdisk with cd-rom support and type at the a:format c: after formatting change to the cd-rom drive usually e: and type setup win98 shou...
Summary: easiest way to fix this is fdisk choose large disk support delete primary dos partition add primary dos partition choose maximum set active ,reboot fo...
Summary: Use a 95 or 98 start up disk Boot to A: Fdisk Delete Partition or logical drive Delete primary DOS partition if fat16 or fat32 Delete Non DOS if NTF...
Summary: Have WIN ME.Trying to Fdisk because of a Kernel32.dll error when using Adobe's Photo Deluxe on my scanner. When I select Delete Primary DOS partition...
Summary: OK, here you go.......(this is going to be a long post and I think I'll split it into two even, but might be useful for others who don't want to spend...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
