Summary: Thanks to all of you that answered re: my slow defrag problem. I shut down and restarted in safe mode and defrag done, no problem. Also thanks to min...
Summary: I found this page from doing a search,,,I had an old computer that I finally got working and had the defrag problem back when I was using this one. I ...
Summary: Do this: www.mesich.com Click on trouble shooting, then scroll down to the end of the frame and click on "win98 defrag problems". Follow instructions ...
Summary: I too am having defrag problems. When I start defrag, it does it's normal routine where it starts checking folders, but now instead of defragging it j...
Summary: I have problem with win95, after import image I get in the defrag that the disk is undefrag (n%) even after I run the defrag again and again. I try t...
Summary: I've experienced the same problem after turning off all the obvious utilities. I once found the culprit on my system but didn't write it down and hav...
Summary: I had this problem too. You can scan your drive before running defrag. However, if you can't resolve by doing that maybe your computer is too frag. ...
Summary: OK, here goes, I tried to defrag the computer after running scan disk and got the defrag205....deleted the applog like microsoft said...ran a thorough...
Summary: I'm running Win 98, 366 mhz, 160 RAM Had the PC since 2/99 Yesterday I booted up my computer and couldn't get it past the set-up screen. I ran ScanDi...
Summary: if you are haveing a problem with defrag and it keeps starting over and over and it does not go any farther. what you can do is go to start then prog...
Summary: I am unable to scan and defrag my 18GB harddisk using the utilities that come with Win98. I tried Microsoft technical support and the problem seems to...
Summary: I have had no problems with disk defrag before today on both disks C:\ 6.02 IDE and D:\ 8.49 ultra 2 SCSI, but last night did a disk clean up deleting...
Summary: Hi i'm experiencing a problem with my defrag.It's only happened this last week.I run scandisk and then defrag but defrag stops at %10.I looked at deta...
Summary: I have my task scheduler set to run Scandisk and a Defrag overnight. When I feel I need to run them, I leave my computer on after using the Ctrl+Alt+D...
Summary: I have been trying to run the Defrag. and it starts, gets to l0%, the starts over again after a message comes up which says DRIVE CONTENTS CHANGED RES...
Summary: Hi all. Having a problem defragging the Hd. I always run defrag and scan disc in safe mode and it always zips through it with no problems....until tod...
Summary: I seem to have the same problem and have tried following the applog instructions, the safe function as well as the deletion of all files *.tmp,~*.* I ...
Summary: progress monitor flickers & shows no progress message in Scandisc says "other programs or Windows may be writing to HD".I have closed Virus checker & ...
Summary: there are loads of things that can cause this. One of the most popular is the Microsoft Find Fast program that installs by default and runs in the ba...
Summary: This computer belongs to a friend of mine. The case is normally closed and doesn't have as much harddrive accessing as during a defrag so heat wasn't...
Summary: I'm having trouble with a friends computer which refuses to boot to windows. Its running Windows98. When it boots up it goes through the usual DOS boo...
Summary: I try to Defrag C: drive and it stops at 2% then resumes. Problem is it won't get past 2% and it keeps repeating the process. Any solutions??...
Summary: I've always been able to run defrag in the past but now when I try I get a message saying that I have disc errors and to run scan disc first. I've ran...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
