Summary: A few days ago, I noticed that my power supply fan was not working and the case was very warm. I replaced the power supply and the machine booted fine...
Summary: I have an old 486 computer with a dead hard drive and I have a Pentium 133 with a cooked motherboard. Can someone tell me if it is possible to take t...
Summary: Hi there,can you tell me if I go into my DOS prompt to refomat my hard drive can i do it by using floppies or do I need to do it by my cdrom...
Summary: Want to install a new larger hard drive. Can I use the old hd as a slave (On the same ide cable) and only copy those files that I want to the new hd? ...
Summary: How can I recover deleted file from floppy A: ? (infected by virus W97M.Thus.A)I am using norton anti virus 5.0 for windows 95. I used norton unerase ...
Summary: As stated before I have a problem in my hard drive. If I install a new hard drive, can I transfer all my stuff from the old drive to the new one and ...
Summary: i have a p55xb2 200mh motherboard and i want to put in a bigger hard drive can i go to a 6.4 hard drive?????? will my motherboard handle it?...
Summary: My hard drive (win 98) failed to boot. I tried to reinstall win 98, not successful with the message "there's no hard drive or hard drive not recognize...
Summary: Recently, as I launched an application my 166 locked up. In order for it to boot again I had to uninstall and reinstall (in Device Mgr) most of the ...
Summary: I have two hard drives for the same computer. Windows 95 is on both. My modem connects to my internet provider (aol) on one of them OK. When I swit...
Summary: I have three questions. My husband obtained an old computer out of the trash at his workplace. It had a relatively newer hard drive in it (Caviar 22...
Summary: I have a new system; The mother board is a KT7A-RAID with 256 mb of ram, I have dual 40 GB Western Digital hard drives and running Windows 98 that I w...
Summary: Thanks for your response to my problem. I removed the signal and power cables from my primary slave HD and set the BIOS to none and all 0's for that H...
Summary: i have a quantum hard drive. When inserted in my system it can't be recognized. When i boot with the system diskette (floppy) and try to use fdisk to ...
Summary: I stated this same problem a couple of days back, but none of the suggestions worked. I also posted in other forums and asked in several computer chat...
Summary: I didn't yell at you..... I was trying to make the statement stand out. I'm not mad. I finally setup the computer next to this one so I can say exact...
Summary: First I would have checked the cable from the cd-rom to the sound card because you could have connected it wrong. Second I would have checked the sou...
Summary: I set up Win95 for three users, and now wish to use a sound scheme under one user name that was created under one of the other user names. I can see a...
Summary: ok heres what happened -- My hard drive (Fujitsu MPF3204AH-20g) worked fine before I purhase the new hard drive (MAxtor 40g). First of all, I put my M...
Summary: I am almost finished getting what I need off my old computer. I needed to go back & try to upload some pictures & edit a saved website & now the thing...
Summary: some how I formatted my 30gb hard drive to be only 1.99gb how can I recover this please say I can! I used fdisk to make an active partition but all iv...
Summary: Help I have installed win 95 on an 386SX 25mHz 4 MB RAM Fujitsu 2 GB hard drive that's right 2000 MEGS to make my hard drive work on my computer I use...
Summary: My computer contains a Pentium III 600MHz Coppermine processor on a Asus P3V 4X motherboard, 128 MB RAM, and a 13Gig Maxtor Hard Drive. I'm running W...
Summary: I have an old pentium computer. The hard drive is 420MB. So I wanted to move the hard drive to a faster computer. I installed the hard drive to IDE2 i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
