Summary: I have a 30 gig harddrive and i currently am running 98, i want to daul boot Windows 3.11, Windows 98, Windows XP, and Linux all on one hd, can anyone...
Summary: I currently am running a 486 on Win 3.11, and a Pentium on 98, and a Pentium III running XP, all work good on there own, I have 98 and XP on the netwo...
Summary: I'm trying to network a WFW 3.11 machine with an XP machine. Ran into problems. Borrowed a friend's XP machine to try to narrow it down. Networked X...
Summary: Hi, I wand to try to run a network between Win 3.11 (workgroup) and 2 XP pcs. So I used a Fiberline network card but nothing happend. It seems that di...
Summary: I was wondering if it's possible to boot into Windows 3.11 with more than 16MB ram. It might boot in with more but when I open a prompt session, type ...
Summary: Ok i have a 30 gig harddrive and i wanna install 3.11 xp 98 and linux all on the same hd, i have to make 4 paritions but , how would i get all 4 of th...
Summary: Before I start, Changing operating systems isn't the solution. They run something that only has 3.11 support (yes, said i know) BUT I can't change OS'...
Summary: Some time ago I copied all the Win 3.11 for workgroups floppies into one folder and burned the folder onto a CD. I got round to doing something with ...
Summary: I have a PC running a Windows 98 and I want to install a Windows 3.11 for WorkGroups. If I install it with the normal Setup of Windows 3.11, it may ca...
Summary: Hi Sure, windows 3.11 Would run great on that machine. (that thing can almost fly ;-) ) Id runned it for a few years on my PII-266Mhz with 64mb ram I...
Summary: let me tell you this, i have been trough a hell of a week :p. first my pc crashed dramatically, due to a hardware error, i tried to quickrestore my pc...
Summary: i have a P4 with 512DDR and dual boot with windows XP, wfw 3.11 and red hat linux. i know that wfw 3.11 is a bit old but i like to experinment. i rece...
Summary: start with any boot disk (doesn't matter which one) and write "format c:" (without the quotes). Then insert a DOS install disk and install DOS, then I...
Summary: I recently experimented with Dos 6.22 & Win 3.11 (Workgroups). I already had a problem with getting anything but standard VGA out of my Radeon 7500. ...
Summary: Hi, I am currently running Windows XP Professional and i would like to run Windows 3.1 or 3.11 side by side. I have 3.1 and 3.11 on floppy and wish t...
Summary: Some details to get work old win versions: With the 3XSTART we can install and run all versions from 1.01 to 3.11. Surprisingly win 1.01 to win/286 (2...
Summary: Hey Guys I have a problem. I have A windows Xp Machine here that I want to network with My windows 3.11 machine Over a Printer cable SO I can do a net...
Summary: First I have to say I am not going to tell yous all to get a life like the other person did. I am just asking why. I am 13 and saw Windows 95 when I w...
Summary: Hi, I'm trying to run WFW 3.11 under DOS 7.10. I have Windows 98 SE and WFW 3.11 (in separate directories) on my C: drive, which is FAT16. Several t...
Summary: it is possible so don't dispare... just a few things you need to check.... first (and i know a little obvious) make sure you have the proper type of c...
Summary: I cannot get them to coexist on the same machine. When I installed '98 on another partition, it took over Win 3.11. If you type "win" at the DOS promp...
Summary: My Celeron 466 128 MB RAM (which was running '98) now has dual boot. (I use the bootmanager that comes with OS2 Warp 3 for that). I now run Opendos 7....
Summary: How can I boot Win 3.11 and Win98 in the same system ? Somebody have the cake recip? I really need this information ... Is this a configuration in the...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
