Summary: Thanks to those who replied yesterday (LG 16x Dual layer DVD burner is slow to read/burn DVD's using DVD shrink). I checked to see if DMA mode was on ...
Summary: Hi folks My HD and DVD ROM are stuck in PIO mode. I recently installed WinXP with sp1 on a 500mHz Celeron PC with a SiS 620/5595 chipset. This chipse...
Summary: Hi, my Plextor CD burner runs only in PIO mode on the second IDE channel, not in DMA mode. I tried to set it to DMA but it still only wants to run in ...
Summary: My master hard drive is running in PIO mode 4, although it is capable of UDMA mode 6. Seems as someone was fooling with my computer while i was away r...
Summary: hi i have a dell inspiron 2650 and it is stuck in function mode 'fn' wierd thing is if i hold down the fn button my keyboard works normally thing is i...
Summary: My LG HL-DT-ST CD-RW GCE-8481B what is on master on secondy IDE Channel goes into PIO mode when i put in a cd i have reinstalled the controllers and g...
Summary: Here is the problem. Before installing SP1 or SP2 my PC wa running fine. My Primary HDD was in UDMA 5. After installing sp2 it's locked in PIO mode. I...
Summary: hi jack and ed- did you ever figure this out? i also seem to be stuck in safe mode and can't get out.... not for the same reasons; i'm not sure how ...
Summary: My new maxtor drive is giving me a bit of trouble in XP SP1. It wont run in UDMA mode, just PIO. I'm getting "The device, \Device\Ide\IdePort0, did ...
Summary: recently i've upgraded to xp and all of a sudden my Lite-On DVD player now runs in PIO mode and I can't seem to change it back. I could use some help ...
Summary: My PC was getting so dirty and dusty inside, I decided to open it up and clean it with an air can. I do this and close it back up. I'm using a Promi...
Summary: I had a similar issue with a Dell Dimension 4100 just clean-installed with Win XP Pro. I have a TDK 16x burner on IDE Secondary Master and an NEC DVD-...
Summary: I have a Plextor PX-716A burner. I can't change the PIO mode in Device manager. It says enable UDMA mode if possible which has always worked until now...
Summary: Whenever you load or re-load Windows from scratch, you must load the drivers for your mboard, particularly the main chipset drivers, so that Windows h...
Summary: My primary channel is stuck on PIO mode. So was my secondary channel. I've seen this before and what I did was remove both channels, plus the SiS PC...
Summary: Well, at present, IMHO, price of burners correlate with their quallity in the following way: technology developes very fast and there is really no po...
Summary: After problems trying to get rid of downloader virus I ended up wiping files and reloading windows xp. Unfortunately I was in safe mode at the time. A...
Summary: I'm using an A-Bit BH6 mobo, supporting only up to UDMA33 (mode 2). On my primary channel I have a Seagate HDD as master and Pioneer 116s DVD drive(su...
Summary: I am reinstalling Win XP home edition on my computer. After I get through the first steps (copying files), the computer automatically restartes itsel...
Summary: hi there. my dvd burner is a cyberhome 16x dvd burner. its been working well for a while. recently i bought 2 seperate packs of 16x memorex dvd-r's...
Summary: If " Still doesnt work. " means:- 1. You Disconnected your "other disc drive" from the IDE-2 connector where it was Master. and disconnected its Powe...
Summary: hello, i have a very annoying problem where something called master cd creator is stuck in my startup. it is a program used on packard bell to make a ...
Summary: I have a LG DVD burner that is 18 months old and now wont read any cds of DVDs any more. It has only burnt about 2 dozen DVDs. Should I just through i...
Summary: Someone suggested I install motherboard drivers to stop my hard drives running in PIO mode, in the hope that this would cure a stuttering problem in g...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
