Summary: Help! I am sure there is something I am missing. Here is my issue. I cannot recall the brand name of the DVD burner, but here is the info from the ...
Summary: My DVD burner ran perfectly for awhile...but now it is starting to slow down. When I burn DVDs now, the Buffer level jumps from 80% to 10% or so and b...
Summary: This question involves a comparison between two machines I have. One has dvd burning issues the other doesn't. Issue one is Intel board, PIII 1Ghz wit...
Summary: OK... so up till just a few hours ago I believed that it was impossible to buy a DVD Burner for less than 200 dollars... then I found a few on www.new...
Summary: AFAIK DVD Shrink, reads the DATA, decides how small it can shrink it to, then Burns to DVD after creating an ISO. The speed of the DVD Burner is not a...
Summary: What kind of DVDs do you use? What NEC DVD burner do you have? (write/read speeds) A little more information would help out alot; also make sure tha...
Summary: Hi, I hope someone knows the answer to this. If I put an 8x DVD dual format DVD burner (Pacific Digital) into a USB 2.0 /Firewire external enclosure ...
Summary: Hey everyone hows it going? I'm having a little problem here with my DVD Burner, but let's start at the beginning. I recently had problems with my fan...
Summary: I just got a Sony DRU-800A DVD burner, it is an internal DVD burner. The one I had before was an external HP DVD burner, both burners are capable of t...
Summary: Hi, I got a Pacific Digital Dual format 4X External DVD Burner for Christmas and installed it into my HP Pavillion. I think my computer is now 733mHz...
Summary: What is the best DVD burner money can buy? Price is not an issue here, in fact, it could be $10,000 for all I care. I just can't seem to find an artic...
Summary: I have a new external usb DVD burner... It burns discs okay, but I noticed that the drawer will hang to one side very briefly before an open or close...
Summary: You guys pretty much covered it but just to clarify a couple of things... Pairing a HDD with an optical drive used to be a problem, but that was long ...
Summary: I have the GSA-4081B dvd burner it has been working great but today something very strange started to happen. I usually burn CD-Rs with Nero at 16x wi...
Summary: OK, I set my WRITE speed to 24x...and it burns at 6x for a while, and starts to increase as the CD reaches the end...at the end...it starts to fluxuat...
Summary: I bought a 4x DVD +r burner about a month and a half ago (an A Open I believe) It worked fine for the first 3 weeks then started messing up (it was ta...
Summary: Does anybody make an internal SCSI DVD+/-RW drive? I've been searching the internet for hours and have come up empty handed. SCSI CD-RW drives are re...
Summary: I had a similar issue with my Maddog DVD burner that I only had for about a year also. I tried the similar trouble shoot that you did. Though after ...
Summary: Try going to Start / Control Panel / System / Hardware / Device Manager / IDE ATA-Atapi Controllers and right click on the IDE channel to which the DV...
Summary: Does the hard drive need defragmented? Did you do test the hard drive speed using nero? Are any programs eating up your ram? Like Jam says usually...
Summary: Hi Just got me a DVD burner Sony U510A It burns DVD+R and DVD+RW just great. The problem I have with it is that it cant burn DVD-R or DVD-RW under DMA...
Summary: Home built or pre made pc? DVD burner set as master, secondary ide? Power supply ratings? NO CHEAP POWER SUPPLYS!!!! At least 512mb of ram. Write spee...
Summary: Don't take this the wrong way. This sounds like the person I overheard complaining about the high cost of RAM. I remember paying $900 for 64MB of 60...
Summary: DVD-ROM & DVD burner should not be on the same channel...open your case & change the configuration, or take it back & tell them to change it for you. ...
Summary: I have a dvd burner installed in my comp. It works fine for reading but when I try to use any copy dvd programs its says dvd not present. When I call ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
