Summary: Hi all, I am trying to create a bootable CD and boot it using a USB CD-ROM drive. I an using a Supermicro motherboard P4SCT+II that support boot from ...
Summary: Hi all! I should write to DOS area.. There was alredy a topic about this problem. I have found that is possible to boot from USB CD rom (my is even re...
Summary: I have a PC that only has HD IDE internal and USB-CDROM external. I have not any floppy. I want to restore my ghost's image from my usb-cdrom. I have...
Summary: I have to convert an existing DOS bootable CD-ROM script so that I can use an IOMEGA USB CD-RW drive. My existing bootable CD looks like an A: drive w...
Summary: the problem is your boot disk and cd rom disk have different versions of dos so download dos boot disk with cd rom support . it should work if not e-m...
Summary: I have a PC that only has HD IDE internal and USB-CDROM external. I have not any floppy. I want to restore my ghost's image from my usb-cdrom. I have...
Summary: Hello, I need your help urgently. I take a CD-rom Ide installed in an external unit connected to the pc as the port USB. I have to restore an image cr...
Summary: I want to make a cd which can be boot from the usb cdrom. below are my config.sys and autoexe.bat config.sys DOS=HIGH,UMB lastdrive=Z device=HIMEM.SYS...
Summary: I'm not sure exactly what you mean by "USB cd-rom boot to dos". If you mean "Can I use a bootable cd?" The answer is no. If you mean "Can I make a boo...
Summary: I am trying to refurbish an old computer I have to give to a family member. The hard drive was blank and I was having trouble booting from the CD-ROM...
Summary: I think im having arix's original problem, i have a sony laptop and a cheap unbranded (torisan) pcmcia cd rom drive, iv made my own boot floppy and ha...
Summary: I have a laptop with an external floppy drive only. I want to be able to plug in my Que! external USB cd-rom drive and boot from a Windows 98SE flopp...
Summary: For a limited time, you may download the diskette I created for accessing USB CD ROMs... Get it here: http://209.58.228.119/downloads/usbdoscd.exe It...
Summary: Even if your PC is very old,it can recognize the CD-ROM at BIOS level (the hardware the machine has does know that there is a CD-ROM). Your problem...
Summary: Installing MS-Dos 5.0 from cd-rom’s / 5 cd-rw’s or 5 mini-cd’s the best because their small Your computer must be bootable from a cd-rom or it will ...
Summary: you are looking for what I am also looking4-my pc is 12mb ram,420mb hd capacity;model acer 486dx/66,and the problem:DOS Detection of my CD Rom!I tried...
Summary: i have a problem, I hooked up my NEC CDR-272 to my 486/33 but there is something wrong with it orr the sofware, it cannot find the cdrom drive and it ...
Summary: OK, for beginner, try this first: DIR C:\WINDOWS\COMMAND\MSCDEX.EXE Can the command DIR list the file MSCDEX.EXE there? If it does, then launch a text...
Summary: Sure, just make it a bootable CD, with the dos files on it, and edit the config.sys and autoexec.bat files as required. If the machine won't boot from...
Summary: HI guys. I have a 486, old PCbut i need to use it for any reason!. The problem is that i cannot boot from the CD-Rom, because i lost the floppy driver...
Summary: I guess I left out details. Basically, my point is that I want to install DOS as the OS on my external. This is completely to do with this forum, is i...
Summary: There should be an option in BIOS where you can choose the boot sequence of the laptop. Usually it will say like C,A or A,C or even CD-ROM, FLoppy, H...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
