Summary: Hello Everyone, The recomendation for the DOS partition on NW 6.0 is RAM + 200 MB. Now I tried but failed. Which version/distribution of DOS lets you ...
Summary: I was trying to install Netware 4.2 on a 18.2GB SCSI ULTRA WIDE 3 Hard disk. The Hard disk was prepared with DOS 6.22. During the installation process...
Summary: In last time, when we have a server with Novell 4.11 or 4.2 we mount a disk of 1 Gb. I load MS-DOS as OS start in a little partition (150 Mb). And the...
Summary: Hi I had installed 4.3 GB on my system and I want to install Novell 3.12 I had created a Boot partion of 600 MB and then started to install the Novel...
Summary: Thanks for the reply Wanderer, I am sorry if I was not clear in asking the question. What I meant to ask was how to create a DOS partition to accomoda...
Summary: We fired our Novell expert and now I am trying to learn Netware 4.2 to get us by till we replace this system. I have ordered a Sybex book, but it is ...
Summary: Hello, I am a Netware newbie (last time I ran a Netware server was in 4th grade :| ). Anywayz when I boot the computer (with a CDROM boot floppy) i g...
Summary: Hello ! I have a Novell Netware 4.10 server. System disk was mirroring. Backup disk (secondary disk) has a Dos partition but when i mirror the system ...
Summary: I'm trying to run Netware on intel SE7501BR2 motherboard 1x10K Segate SCSI ULTRA320. Instalation runs smoothly. Afther the reboot the system hangs bec...
Summary: Can someone tell me the general effort required (in hours) it takes to migrate from 4.2 to 6? Also what are the major risks associated with upgrading...
Summary: hello netwre fans! please help me. I have a netware 5.0 server that it's dos partition (2 GB) is formated to ntfs mistakenly. how can i recover my ser...
Summary: I start with a boot disk and create a primary dos partition of about 150 mb and make it active. Then I create the rest of the space as a logical dos ...
Summary: According to the 4.2 documentation, up 32TB of disk space is supported. This does not mean that the particular device drivers that you are using supp...
Summary: Hi. i'm running a netware 4.2 server. up to now there has been no problems, but all of a sudden no one can log into in under 25 minutes!! the hard dis...
Summary: Is it possible to connect to a netware 4.2 LAN at the office from your home using a modem? We have a LAN at the office but it would be real nice if I ...
Summary: We are running Netware for Small Business 4.2 which has Netware 4.11. Our accounting software has an upgrade available that requires either Win2K or ...
Summary: I have novell netware 4.2 with hardisk mirrored. By mistake one of the hardisk was removed while the server was online. How can I remirror the harddis...
Summary: I start with a boot disk and create a primary dos partition of about 150 mb and make it active. Then I create the rest of the space as a logical dos ...
Summary: I'm going to install Novell NetWare 4.2 on my computer, but need help. Is there any form for install-manual or other step-by-step information how to ...
Summary: I have seen lots of people posting that their time is too slow. I have the oposite problem. Mine will go ahead bya bout 10 minutes over time and see...
Summary: Don't know it all by heart; but here it goes; Btw, have you looked at support.novell.com ? All the documentation is online. 1. Partitioning the harddi...
Summary: Any thoughts on the following, no matter how seemingly small or insignificant, would be MOST appreciated!! Under our Novell 4.2/NWSAA 4.0 environment ...
Summary: Easy! We do it all the time at the school where I work. 1) Create a DOS partition of 128 MB and make it active. 2) Install WIN2K on the disk after ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
