Summary: With old 2-4 speed Cd.Rom, that requires to connect through Sound blaster 16PRO, I'd like to be able to access from DOS. Can you provide me with Drive...
Summary: My drivers I installed with the emergency boot disk in dos work in dos with the cd-roms but not in windows 98 and when i start win98 everytime it says...
Summary: Help! I am trying to update a driver for my cd-rom, however, I keep getting the message mscdex.exe not found. I have now downloaded this and I am uns...
Summary: I am writing this in favor of my father. He has an old 233Mhz pentium. Along with that he has an old Torisan 4x cd-rom in which has no model number in...
Summary: Do you have a soundcard with DOS drivers installed? I had the same problem with a Soundblaster Live Card. I have disabled the SB16 emulation hardware ...
Summary: These have been copied from previous posts , overkill I know , but there are a lot of reasons . -------------- If it's not to late , go back to a goo...
Summary: i use to be able to use a floppy disk in DOS when booting up, so that DOS recognizes my cd-rom. BUT, after installing my Cd-Rw It Just freezez up afte...
Summary: I'm trying to install Windows 95 but can't get the system to recognize my CD-Rom...where would I go to get the drivers (I guess that's what I need to...
Summary: Try booting using a Win98 boot disk from www.bootdisk.com If it loads drivers for the cD-ROM and it works in DOS mode after booting with the boot disk...
Summary: DAVEINCAPS: Back of CD_ROM has 3 wire connectors. 4 PIN is power supply Thin 3 wire (Red, White, Black) connects cd-rom to sound board? 40 Pin? conne...
Summary: You need dos drivers for your rom drive. Go to the manufactures website and look for the dos drivers. In dos, your drive may not be G, it may now be F...
Summary: Ok, currently I am running a dual boot system, with Windows 2000 Pro, and Windows 98SE, this is what I want to be able to do: I want to be able to boo...
Summary: It's possible this is a Win 95 issue but in the past I sucessfully used at least 3 different burners under 95 and I know of many others who did simila...
Summary: Sometimes older device drivers for cd roms had to have the address and irq specified in the config.sys line that called the driver. Newer drivers sho...
Summary: If you reformat and re-install, all your patches will be gone. Never install drivers for CD ROM's unless you need to access it in DOS and then you can...
Summary: Complete and OEM versions of 95/98 come with a boot disk which will recognize CD-ROM in DOS. CD-ROMs typically come with DOS drivers and possibly DOS ...
Summary: Hi, I just reformatted a friends computer, but afterwards I noticed that it says: boot record for cd-rom not found boot record for floppy not found B...
Summary: Hi, Yes, in that case I have already PCMCIA card services installed- from CardSoft. Thanks. However, do I need Driver for PCMCIA CD-Rom to function un...
Summary: FIXED THIS ONE> Compatibility mode drivers were loaded. Deleted all drivers for CD rom and IDE drivers in system manager, and reloaded. Now works O...
Summary: Does anyone know where I can download the DOS drivers for the ESS 1869 sound card so that I can adjust the volume level while in pure DOS? I had the D...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
