Summary: I hope this question is DOS-y enough for this list! ;-) We are trying to print from DOS CD-ROM programs (various 1990 U.S. Census discs)on our new PCs...
Summary: I bought a new computer (just the tower) from someone and I like DOS6 so I had him put that in and WIN95. After he left, I noticed he didn't have D:\...
Summary: Hi,I tried to install new windows by useing (pcmcia cd-rom) or (parallel port cd-rom)but I don't know how to make either of them work on DOS, my lapto...
Summary: Hi, anyone know how to make parellel port cd-rom work on DOS,I tried to install new system, my laptop doesn't have internal cd_rom and is that true ab...
Summary: Hey, this happens a lot - don't feel bad. What you've got to do is make sure that you're system BIOS recognizes your drive as being there. When you bo...
Summary: Yes. Can anyone advise me how to connect my dos pc to my win95 pc to share drives. Such as cd rom on win95 pc using direct cable connection. Tahnks...
Summary: ok- heres the deal... i have an old compaq model 4/50(486 dx2 50mhz). I want to put a cd-rom on it, i have installed the cd-rom. The thing is, in the ...
Summary: I have setup a virtual disk using VMWare under Windows 2000 and would like a a CD-ROM device driver for DOS that will run my DVD drive (compatible wit...
Summary: Hi have a Sony PCGA-CD51/A cd rom on a Sony Vaio notebook & the customer has lost his restore cd's. So I just need either a generic Pcmcia driver that...
Summary: I have a Compaq LTE 5150 that was given to me with an empty hard drive. I am trying to put Win98 on it, but I cannot get the CD-ROM to work. I loade...
Summary: Everything seems to be running fine when I boot up it's just I cant get my CD to run the WIN98 setup in DOS. I can get to my D:\ drive but everytime I...
Summary: need drivers for dos to hook up cd-rom compaq peserio 2100 133 MHZ .. I dont wana rip apart the computer to get cd make and modle because its a huge p...
Summary: I am using an old computer a AMI 386SX (1989) and the old CD-ROM drive unit just stopped working. It is a Sony CD Disk Caddy model No. CDU535-01 date...
Summary: I'm tinkering with a Packard Bell Legend 10CD as a machine for my kids to play the games I used to play. My biggest problem lies in getting the CD-RO...
Summary: This may sound crazy, but could I set up a CD-ROM drive on my 286 16Mhz with 1 mb of ram? If so will I have to upgrade to MS-DOS 6.22? The resin for t...
Summary: I formatted my C: drive and have tried to install win98 but the CD drive didn't work so I put in the floppy with the driver. I followed the instructi...
Summary: I have SoundBlaster IDE contoller and my cd-rom is connected on it. Win9x can found the cd-rom, but DOS do not. If I put device-command in config.sys ...
Summary: Do you need a sound card to get the CD-Rom to connect? I am trying to install a matsus---a-kotobuki cr-563-b CD-Rom on to my computer. I connected th...
Summary: The easiest way to get your CD-ROM up and running is to download the DOS CD-ROM installation software from either the manufacturer or a driver website...
Summary: I am trying to make bootable an old pentium. Theres no partition, A: drive is accessable but the CD-ROm drive is not. I need dos CD-ROM drivers so tha...
Summary: You will need to create a floppy disk to start your system for DOS CD-ROM access. Here are the steps: 1) Get a blank floppy disk 2) In Windows, Click...
Summary: If you can locate the Make & Model of CD-ROM (Normaly on a label on side of case) goto: http://www.windrivers.com/company.htm (Forget about the Windri...
Summary: Getting a similar message: "CDR101: Not ready reading drive J: abort, retry, fail" How do I get it to read my cd--I have one in there and it's as if I...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
