Summary: I am using KPPP to connect to the internet. I can connect but I can not go to any sites like google.com I can telnet to IP addresses though. Does an...
Summary: BIND, and DNS in general, can be a bit confusing at first. You're just going to have to do the reading and learn this stuff. Here's what I recommend....
Summary: I am connecting via samba to a printer on another windows machine on the network. Do I need to specify the host ip??? What if the computer's IP is c...
Summary: I had the same problem so what I did was load into windows ran Winipcfg clicked more info button and copied the ip gateway and DNS listings then ran l...
Summary: This all depends on the distro you are using. To temporarily assign an ip address, you can use the ifconfig command. This will only work until your n...
Summary: When using a telent server on a LAN with DHCP, is it necessary to have a local DNS eg BIND? All PCs (W98) on the LAN use DHCP (served by a dial-up ISD...
Summary: Just thought I'd pitch in with this: I've had the same problem as joltz - although I'm running Mandrake 10.0 (with some community updates) and using ...
Summary: Hi, I'm having a problem with my sendmail and DNS configuration. I have a Linux box that I use as my workstation as well as being the sendmail ser...
Summary: Im having the same problem as you at the moment, but i dont think that forwarding DNS requests is quite the solution (im gona have to do that later th...
Summary: On my Wife's Laptop, (Category View) I open Control Panel, Network and Internet connections, Network Connections, then open the Icon representing th...
Summary: when you say you tried configuring dns do you mean as a client or as a server and please list the details if your wanting server the service in questi...
Summary: There is more than one way to skin this cat. 1) TCP Wrappers and only allow internal hosts to connect to the DNS service. Use the hosts.allow file. ...
Summary: http://www.yolinux.com/TUTORIALS/LinuxTutorialInitProcess.html type in "ps -x" in a shell. That will show you every non-user process you have running...
Summary: Hi folks, I have been looking around on http://www.sendmail.org/ and failed to find the mailing list Or forum where users post for help. Pls advise w...
Summary: Hi I am running redhat 7.0 has a DNS server. It works find from the server but When I tried to access the server from windows client I specified the ...
Summary: Hi, I have my Linux box connected to a network that has a dial-on-demand router. I need to use sendmail on this box for things such as LogWatch and A...
Summary: Sounds like your DNS is not set up correctly. Are you running DHCP or is it all set statically? Make sure you have the correct servers listed in /e...
Summary: Audiophile is probably right. Check with your ISP for a list of DNS servers. These should be in a FAQ somewhere. You can insert these into /etc/reso...
Summary: You can display/configure your gateways with the route command, to list your routing table: $ /sbin/route You DNS servers should be listed in either /...
Summary: since you said your using webin install samba as previously suggested under networking add the name and ips of your other machines to the host table a...
Summary: I'm assuming the clients that are having problems are windows clients. You probably set your Internet Browser to use the proxy server. The proxy serve...
Summary: I have two slackware 9 boxes that run routing internally (fake ips) and samba as well as basic slackware processes. About once every 9 or 10 seconds,...
Summary: Dear all After update DNS db server, I used to restart the server everytime: e.g. "/etc/init.d/named restart" But can I do this without restarting? Th...
Summary: OK from the above I can see that it probably doesn't work. The output of ifconfig says that your IP is 220.238.5.182 with a netmask of 255.255.255.255...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
