Summary: I recently purchased a new computer from Dell with Windows Me installed on it and a 3COM 3C905C-TXM 10/1000 Remote Wakeup Network Card. I have a cabl...
Summary: i have me and i need to install the DHCP for my network to share our cable connection. the problem is i have only the hp recovery cd and this does no...
Summary: when I go to release my IP number under run then winipcfg it comes up with an error message concerning the DHCP???? then it completely locks up my sys...
Summary: I had Windows 98 and a General Instrument cable modem with no problems. Upgraded to Windows ME and now I keep getting DHCP unavailable. My setting w...
Summary: Hello, i have problem like in the topic. My ISP uses DHCP to provide IP's, i have problem becouse my IP has changed to diffrent and i'm sure it is wro...
Summary: I got a system that has a hard time connecting to DSL, I have already replaced the nic card, and had it running fine but slow, refresh the ip with win...
Summary: Hi Mark Ive tried that..this is the response.. DNS servers 194.168.8.100 & 194.168.4.100 DEFAULT GATEWAY ADDRESS:81.103.116.254 IP ADDRESS:81.103.116....
Summary: Can you browse with Internet Explorer? Can you ping by friendly name? Do this: Connect to AOL. Go to start>>run>>command. Click ok. In the MS-DOS wind...
Summary: Normally you have to unplug the USB connection and remove or disable the USB modem support software, as the system will be looking for the Internet on...
Summary: The following is LONG, but complete, as I had to copy and paste from my document database, as I do not have the oroginal web pages this info came from...
Summary: Try here- http://www.linksys.com/tech_helper/intro.html You should not need a host name and domain name to make the router work. You MAY need to enabl...
Summary: From the run box, type winipcfg to open the IP config untility. From here you can see your IP address. You can then release it and get a new one. If i...
Summary: I am trying to connect a Win ME computer as server together with a Windows 95 computer with the TCP/IP protocal. On the Win95 computer I keep getting ...
Summary: I ran into an odd situation today. I had to perform a system reinstallation on a Compaq desktop for a client. I don't recall what model Compaq it wa...
Summary: If I'm not mistaken (and if I am, someone will let us both know), as long as the router has DHCP enabled and assigns the IP address to both computers,...
Summary: Do what I did. Buy a hardware firewall/router and then you dont have to worry about anyone getting to anything. The one I bought is the Linksys BEFSR4...
Summary: I have tried installing a peer to peer network using ME but none of the computers see each other,although they are able to access the net through the ...
Summary: Yep you'll need IP loaded to look at ANY webpage on the Internet. Go to Network Properties and click Add - Protocol - Microsoft - TCP/IP - Click OK. ...
Summary: I am trying to network MacOs 9 with windows Me for file sharing. I already have both computers hooked into a router which allows them both to access m...
Summary: Network (not internet) slows down in WINME (not in win98se that I tryed) when Disk cache buffers reaches about 50 kb and the mouse starts to stouder (...
Summary: hello you might try useing netbeau in xp and use that as your net work protocal. ow-to' @ www.duxcw.com The NetBEUI Protocol Is Not Available in Wind...
Summary: I recently purchased an ORiNOCO ISA Adapter and Silver card for my desktop PIII PC. I already have two other desktop machines talking to the transceiv...
Summary: Constantly getting an error message "Could not identify your machine settings" I can prevent this from appearing by running "msconfig" and unchecking ...
Summary: I run Internet sharing using a Linksys hub, router, switch. You plug the cable modem into the LinkSys, and then the PC's into one of the free ports o...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
