Summary: I volunteer network admin for a combined school and church network. We have installed a SonicWall switch which does the content filtering and virus pr...
Summary: Setup: Broadband Business Cable>Cable Modem>Linksys Wireless Router>Primary Domain Server>50 Port Switch>25 Client Win XP Pro Router has the ISP’s S...
Summary: I always use ris to deploy os. But after ris setup, the ip address of the client will be dhcp. Are there anyway to assign the static ip address to the...
Summary: HI, I have only 2 computer connected with Dhcp server (For practice purpose) And I configure the Dhcp server to lease 7 IP Problem is: if I start wi...
Summary: I need my Windows server to access the network by static Ip address how to set that on TCP/IP prorties I have 192.165.110.2 255.255.255.0 192.165.11...
Summary: Hello guys I have an issue, same issue both 2 DL380 G5 - Dual port Embedded NIC Cards. NIC joins point to point and tested with Network too - I go to ...
Summary: Hi to the forum, I have been trying to sort this problem out on and off for 3 years without much luck….hope someone can help me out. I run a windows...
Summary: I have been having problems with win 2003 server for days, but on my travels I have learnt a few things. Have you set up the DHCP correctly, you need ...
Summary: I have a SBS2K3 server running as well as 2 other terminal servers. Both file servers one running accounting software. I cannot RDP or terminal serv...
Summary: Setting up a new server (installed DC, DNS server, RAS/VPN, and now DHCP server) I specified my range: 192.168.254.100 - 192.168.254.200 Server's IP ...
Summary: I have 2 Win2K Servers with static ip's. Now I want them to be networked so that they can communicate. How can I achieve this? This is just a peer-to-...
Summary: Hey guys! I have a question about Ghost Cast Server. We have a network that is all static IP addresses. But I want to make our GhostCast Server an Dyn...
Summary: HII have a question,if i am using NAT on a RRAS server and designate one NIC as a public and the other as a private normaly i would have to have a sta...
Summary: What would be the proper way to set things up? Let me know if there are any issues with this setup please... ISP > Router (No DHCP) > Server NIC1 (WAN...
Summary: We have a Server 2003 network with 8 PCs (mixture of Windows 2K and XP Pro). We purchased 2 new Dell Dimension 5100 PCs (Win XP Pro SP2) as replacemen...
Summary: I was hoping to get assistance in configuration on my server system. I'm really too green to be doing this for the company I work for but we needed th...
Summary: Hi All, Previously I was running simple workgroup environment with 1 file server & 1 Linksys WLAN router w/ dhcp built-in. I have decided to use Win 2...
Summary: The first thing you should do is set the server with a static IP. Then I would set up the server to run the DNS and the DHCP and not the router. I thi...
Summary: I am trying to configure a server to run a small network (10-15 computers). The server is running Windows Server 2003 Standard, and it will be hostin...
Summary: there may be a problem of name resolution. 1.check that ur dhcp has a static ip address 2.ping ur dhcp server and AD by its netbios name and see wheth...
Summary: i have the following network details as below i have a ethernet connection this is DHCP assiged and i want to change to static. how to do it please ne...
Summary: This is the Test setup with one server and one workstation. Network connection: ZoomX5 DSL --> Switch_A. Server_X & workstation_J(ws_j) connect to Swi...
Summary: Hi, I'm having serious problems with setting up dhcp in win2k3. I have to nic's in my pc. 1 is for lan & 2nd is for satellite card. Basically i have ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
