Summary: I manage a 2003/200 server domain (1 single domain) scattered in 2 sites. These 2 site are connected via VPN (ADSL). In one site there is the FSMO and...
Summary: Hi, I'm experiencing problems setting up my new Win03 server. My current config. 1.) ISP DSL link to a Netopia dsl router with DNS and DHCP enabled 2....
Summary: there may be a problem of name resolution. 1.check that ur dhcp has a static ip address 2.ping ur dhcp server and AD by its netbios name and see wheth...
Summary: I'm hoping someone knows an answer for the cause of this... I've read the problem in various forums and even on this newsgroup, yet noone seems to hav...
Summary: Hey, I'm new at setting up a windows 2003 server, so I need some help. I can't seem to get the group policies to work. In the event viewer on all clie...
Summary: I am setting up a new Win2K3 network and I am curious about the ideal DHCP/DNS setup. Currently domain controller is running DNS (obviously) while my...
Summary: Ok, problem #1 - you have a server set to get it's IP info from DHCP. Not good! A server should always have a static IP. For whatever reason, your ...
Summary: I am a newbird. I have a basic question for setup windows 2003. I have two NIC , one for ISP and one for my hub. And I want to setup in DHCP. 1. May ...
Summary: Hi! On a server with MS Windows Server 2003 Standard with SP2 (additional hotfixes installed) I made a transfer from ATA HDD to a RAID array. I made i...
Summary: I have a domain controller which is also an internal dns server and dhcp server and an exchange server at another office site here. I also have an ext...
Summary: What you have to check is simply 1. the ip address of the router 2. is DHCP disabled at the router (it should, because one net, one DHCP server to av...
Summary: Hi All I have a problem with DNS I have a LAN with Domain Controller (Windows 2003) and into this I have a email server and 3 webs, all IP into my n...
Summary: Sorry just learning as I go. Yes, I did delete the reservation as it is not needed, since the static address is outside the scope. I have not reviewe...
Summary: My company has a website through www.powweb.com. So say my company url is http://www.ABCcompany.com. Powweb has made it so that if I put anything be...
Summary: I have a problem with RRAS using a Linksys Wag 300N router Current Set-up As required by windows server 2003 when setting up NAT I have two NIC cards ...
Summary: sorry wanderer, it was getting me a little frazzled based on what i've been hearing. so i'll try and install DHCP on the location #2 server and just ...
Summary: New setup w/ SBS 2003 Stnd and 5 local clients (all have XP Pro. SBS 2003 preinstalled and finished setup w/o problem. After running To DO list item f...
Summary: I have built a DNS/DC/Exchange server to handle mail and clients for a small domain. Previously, I was using HostPC to host my webpage and mail server...
Summary: Hi Fredrick, For now shut off the dhcp service. I believe it is under adminitrative tools/services/dhcp server. I don't have it right here in ...
Summary: I am noticing a very slow network access response. While connecting through network neighborhood, a netowork share, and also while opening through Wo...
Summary: 1. if you browse from the run line to the server and it takes awhile to find the machine then you may have that problem. if, however, the explorer pa...
Summary: i have the following network details as below i have a ethernet connection this is DHCP assiged and i want to change to static. how to do it please ne...
Summary: Hi guys! We have HUAWEI SmartAX MT880 ADSL Router through that we are getting internet. We configured in this router DHCP,Gateway and DNS.Previews we ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
