Summary: I have a problem with the DHCP Client!! I must be logged in otherwise the Client can not surf!!!! How can the Client surf when i not be logged in?????...
Summary: When I boot up my windows 2000 computer and log into our network domain, the password is verified but the I do not receive an IP Address. If I go int...
Summary: Has anybody experienced any problems running Windows2000 as a DHCP client? I have a (Linux) DHCP-Server giving me a standard 192.168.*.* not segmente...
Summary: I am running a simple network with two servers. A and B. A is the primary Server running the DNS, DHCP and WINS Servers. B is a Domain Controller wi...
Summary: I am having problem getting my DHCP Dynamic clients to connect to the network. I can ping the server and other static IP address address from my dyna...
Summary: You said the servers subnet is 255.255.255.0 ? 255 is for broadcasting only, it is not a valid ip address/network. I think your problem lies here, bad...
Summary: OK, Just got a cable modem and would realy like to have WIN 2000 pro asign IP addresses to my other clients and forward packets to the DNS server. Wil...
Summary: Dear all, I can not get DHCP and DNS to work together to automatically update the DNS server when a DHCP client is updated. I have successfully set up...
Summary: I am trying to get my 2k server to assign the DNS server address to the client at login. but I am failing. I go into the DHCP settings \properties\dns...
Summary: Don't set a static address. Leave your pc set as a DHCP client. When at work, it will get an address from DHCP. When at home it will try to get an...
Summary: when a DHCP client boots up, it will broadcast to request for an IP address. The first DHCP server to respond is the one it will get an IP address fr...
Summary: check out the following articles in microsoft knowledge base. How to Configure DHCP Class ID on a Windows 2000 DHCP Client (Q235272) How to Create a N...
Summary: I keep getting occasional IP address conflicts on about two hundred DHCP clients - half are Win9x, the other half 2000 Pro and XP Pro. It seems DHCP ...
Summary: Hi I define an active DHCP on server (star service). But workstation Cannot get ip from it . ON wks Dhcp Client service is start. on one wks it coudno...
Summary: Hi.. I installed a DHCP server with 2 scopes 192.168.2.1 to 192.168.2.20 and another scope from 192.168.3.1 to 192.168.3.20 .. i have total of 25 DHCP...
Summary: Hello all, I have a problem that gets more and more annoying... I am running Windows 2000 Pro on an Athlon 700 Mhz, Epox 7KXZ, Gefore 256 DDR, 256 MB ...
Summary: Yea, how's this? .... After you install Dynamic Host Configuration Protocol (DHCP) and Dynamic Domain Name System (DNS) on the same computer, you may ...
Summary: this might help not sure That one is a bit tricky, because I've never had machines with two NICs in them (God bless the router). My bet would be editi...
Summary: Two seperate issues here. First, I'm not a DHCP guru, but here are a couple of things I do know. You don't want both DHCP servers handing out address...
Summary: Taken directly from Microsoft: "You will probably install more than one DHCP server so that the failure of any individual server will not prevent DHCP...
Summary: DHCP is a Server Service you can not be a client of your own DHCP thats why your computer says dhcp disabled if you have an W2K computer and a W2K ser...
Summary: My ? revolves around using a DHCP server on one segment and then having a relay agent on another. The DHCP clients on the relay segment would have to ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
