Summary: Serious problem with DHCP/DNS I had to disable the DHCP and DNS settings on a windows 2000 server as It was going onto a network on a temporary basis...
Summary: Hi! I have a DC server with 2 NIC's (10.2.2.2 & 10.2.2.3 / 255.255.255.0) and WinRoute installed (with DCHP service stopped). The NIC 10.2.2.2 is used...
Summary: I'm installing 2000 Server, I need a DHCP server on this machine. I installed windows dhcp server. And I need some help..... When I go into "services...
Summary: T-Bone: The DHCP Service is not installed, by default. You have to manually install it. Use Add/Remove Windows Components in control panel and it will...
Summary: The 169.254 address is assigned automatically when the client is set to obtain an IP address automatically but is unable to connect to the DHCP server...
Summary: The 169.254.x.x is an APIPA address i.e. it cna't get address from the DHCP service. Think your making things more complex than they need to be wiht o...
Summary: Gurdal is correct in shring the Internet connection, but - you can't route with that alternative. In Windows 2000, all you need to do is SETUP the DHC...
Summary: When you renew the ip address you just disconnected yourself from the network. After all the client software was running on one ip address and now it ...
Summary: G, You and I are of similiar minds. I compromised for the moment. Allowing the laptops to retain DHCP services, while the docking stations are configu...
Summary: Andy, I didn't think about WINS, that's a good idea because last time I checked my protocol analyzer there were in fact packets from other devices/ser...
Summary: I have a local network that is served by a Windows 2000 server running DHCP. It hands out addresses in the 192.168.1.xxx range (255.255.255.0). I ha...
Summary: Hi, I have 6 computers in my network one server running windows 2000 advance server and the other machines are win me, 98 and xp. I am only new to win...
Summary: I'm thinking you may have to turn off the DHCP on your server. RRAS/NAT has it's own DHCP and I've noticed when you try to setup RRAS/NAT it doesn't ...
Summary: Dear Freinds, This error is poping up every 5 minutes in event log. The DHCP/BINL service has determined that it is not authorized to service clients...
Summary: Hello. I am setting up small business server for the first time, on a small network consisting of 15 computers and 3 printers. Currently our isp provi...
Summary: You don't mention if you're using ICS or RRAS/NAT to connect your clients to the internet...and that's pretty important information. If you're using ...
Summary: Running Win98 ver 4.10.2222 A and DHCP service on Windows2000 server which also runs RASpppoe. After the renewal, the DNS server pointer is the IP a...
Summary: In a win200 server I get the following message each time DHCP starts : " The DHCP service failed to initialize its global parameters. The following ...
Summary: If you'ld like, email me and I'll give you the link to a web page I made with screen shots of my RRAS/NAT setup. NOTE: I don't use the DHCP service o...
Summary: I have a W2k test domain with one W2K server and one NT4 workstation. My domain belongs to a WAN with a lot of domains. When I started the DHCP servic...
Summary: Hello, I have a couple of questions I need to ask a Windows 2000 expert. I have an assigment due in class and here is what I have to do. Here is the s...
Summary: After reading the above I decided to work this out because it was affecting my network as well. My only solution that is currently working very well i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
