Summary: OK, I'm cheap. I have some free ECC DDR PC2100 memory modules that I'd like to use in a motherboard that takes DDR. Since I don't have a motherboard t...
Summary: i have the ECS K7S5A motherboar it supports both ddr and sdram on it, i bought 256mb pc2100 ddr for it and tried it but the motherboard wont boot or a...
Summary: I have a Anthlon 1400 mhz computer aand running windows me.The problum is this I have 512 ddr memory installed in my system propertys it says I only h...
Summary: When I boot up it shows my 400 DDR memory registering at 166 Mhz. How do I get my 400 DDR to its full capacity? I am using an Asus A7N8X motherboard....
Summary: When memory is advertised as follows: "512MB PC3200/2700 DDR Desktop Memory Module" Does this mean that if the motherboard supports the PC3200 s...
Summary: I'm trying to install another stick of 256 ddr ram to my computer. When I do this I it will load almost all of the way up, but then I get the Blue Sc...
Summary: I was wondering what I should do. I am looking at the ASUS P4S800 Motherboard. If I use DDR 400 (PC 3200) Ram, it allows 1 Gig of Memory total, but ...
Summary: I recently purchased a Corsair XMS Platinum(DDR 1GB TwinX1024-3200C2PT) And for the record I'm a "newbie".I built this baby a week or so ago, but I'm ...
Summary: I have a Anthlon 1400 mhz computer os is windows me.I was woundering if someone would know a website I could check config setting for my bios.My mothe...
Summary: Can I use PC133 memory modules in a motherboard that uses DDR 400 memory? I know it will run slower but will it fit and not hurt the motherboard? Th...
Summary: My friend has a older dell computer I forget the model but when I looked last it was a P4 2ghz and had 256mb DDR 2700 ram. 2x128 Quite a few months p...
Summary: Just bought a new ASROCK M/B and an AMD Sampron 2200. Assembled all components but the system did not boot. Found out it’s the DDR 2700 512M caus...
Summary: Hi all, I am a little confused about memory specifications. The computer I am currently using has 1 GB of DDR 3200 memory. I also have 512 MB of DDR 2...
Summary: no u can not use ddr and sdram together but u can use ddr with different speeds, however ur motherboard will only set the speed of the memory to the s...
Summary: i have a motherboard ecs k7ama and i bought a 128 ddr pc 2100 memory and i just don`t know how to set the jumpers and very confuse about these, btw, t...
Summary: Hi, I have an Asus A7A266 Mobo. It supports up to DIMM DDR PC2100 266 MHz memory. I have recently been sent a 256MB PC2700 333MHz module by error. ...
Summary: I have a new motherboard with two memory slots using ddr pc 2700 memory. Do I need to fill both slots or can I use just one memory stick in one slot ...
Summary: Hi again,i have just upgraded my ram memory,the 2 sticks i took out r pc2700(166)total 1 GB,The question i have is this,i was going to give them to my...
Summary: I want to make sure that I get Dual Channel DDR 400 memory, but I cannot tell if they are or not from the descriptions. Can anyone help? Any suggest...
Summary: Noted in farr message below by johnoh: "dual channel memory is a motherboard function" What has to be set in the bios or motherboard to make the syste...
Summary: Hi My motherboard has 2 DDR ram slots. It can take up to 1G in each. At present I have 2, identical, but not matched 512M DDR sticks. If I run memory...
Summary: in my experience, some cards show the 'true' speed and some show double the speed to take into account DDR memory. example DDR memory advertised at 40...
Summary: I had a similar problem earlier to-day with PC2100 and PC2700 memory. They would both work individually, but I just could not get them to work togeth...
Summary: Hi, I am going to buy another memory chip, coz my old one is dead...And i am confuse on which type of memory is better.. The DDR 3200 or the PC133 SDR...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
