Summary: I tried to overclock,with AI Overclock,my p4 2.6 with a P4P800.Well,when i set 10% or 20% of overclock i noticed ddr frequency decreased from 400 MHz ...
Summary: Hey all. I want to change my FSB's speed from 100 MHz to 133 MHz. As you can tell I have PC100 memory so I knwo that needs to be changed before anythi...
Summary: I have found another here which would seem to be a good option (slightly slower but 512 kb and 400 Mhz). My only concern is the letter M after the nam...
Summary: Hi, am not deliberatly trying to overclock, but i was wondering if my settings in BIOS are at their maximum speed.....or can i alter the settings to r...
Summary: I am trying to upgrade this computer to a Pentium III system. It is only a Celeron 400 MHz system. I am looking for a Socket 370 100 FSB processor for...
Summary: "i still got that motherboard that only supports 400 mhz front side" I never heard of a board that only supports one FSB & has no other options...are ...
Summary: You have DDR(Double Data Rate) memory. Even though the input frequency is only 133Mhz the RAM is effectively running at 266MHz. If the input frequenc...
Summary: Hello Sabertooth, Thanks for responding. I have gone into the BIOS which is how I was able to get the new MB/CPU/HD to even load OS Windows XP. Witho...
Summary: I need help on overclocking my 2.5 barton I have a K7N2 mobo with pc2700 ddr i set my mobo from 166(default) to 200 mhz its running as a 3.2 (2,226 mh...
Summary: Am I right that you have a socket939 system with 2x512MB OCZ and 2x512MB Kingston ??? If YES the problem is the ram controller build into the Athlon64...
Summary: Hi, i need help with 2 cpus, am about to sell one and want your advice of which of them is better to keep: here's te report of cpu-z: (note that cpu1 ...
Summary: it depends on your mobo, cpu, ram and cooling. I had a celeron 400 OCed to 500 MHz at stock voltage and proper cooling on a PC Chips mobo. it was ru...
Summary: i am running a soltek sl-75drv4 motherboard with a amd athlon thunderbird 1.2gb i wont to overclock to 1.5gb and run it on 200mhz to 266 mhz how do i ...
Summary: Oh dear! I got low scores with my newly installed Abit NF7-S with Win XP Pro and ATI 9700 Pro card in 3dMark 2k (6800 points!). I experimentet with th...
Summary: Check the External Frequency setting in your BIOS setup screen. It probably is set to 100 MHz. Change it to 133 MHz. Setting it to 133 will set your F...
Summary: I'm wondering if I have my CPU/Mem settings at optimal. From what I have read 1:1 is best. I have OCed my P4 2.0a Prescott to 2.60 Ghz by raising the ...
Summary: Post this in the Gaming forum next time. You should STOP overclocking if you see any artifacting(white dots, lines, deformed texture). This means that...
Summary: I have a stable OC with a P4 2.0ghz/400fsb/Northwood/0.13 on my Asus P4S533 However, I am concerned that if I continue to keep the Vcore set at 1.60v ...
Summary: Thanks for the advice TMP-Man, I see your using a Leadtek Winfast A7600GT with the Zalman VF700 AlCu, i thought of getting the cooler, i have stock o...
Summary: Currently i'm running an axp 2200+ (stock hsf, not OC'd - 266fsb), and using a single stick of 512 mb ddr pc2700(333). I'm thinking about upgrading to...
Summary: Okay, I am sold on the Barton core 2500+, and here's the rest of the system along with the cheapest prices I could find from Newegg.com. How do they l...
Summary: I am stuck at a fsb of 180 on an amd 2600 mobile cpu. I achieved this setting by 5mhz increments with a 9X multi and a vcore of 1.625. My problem is w...
Summary: my motherboard supports a FSB speeds up to 400/533Mhz and supports Multiplier ratio from 8.0x to 24.0x(which has no effect on my pc when changed) and ...
Summary: DDR vs SDRAM For general use... you aren't going to notice a difference at all. If you encode divx movies, sound, do any compiling or anything that's...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
