Summary: hi we have sun sparc station 5 os 4.1.4 soalris 1.1.2. this machine has very low swap space. can any one one help me how to add more swap space in thi...
Summary: Hi there, I'm trying to install cups on a SUNW,Ultra-5_10 OS: 5.7. I can print the testpage. My Problem is that I can't the other formats like pdf or ...
Summary: I'm trying to compile cups-1.1.18 on a Solaras 8 sparc machine. I'm using gcc-3.2.2. ./configure goes well, but make ends with the following error: Ar...
Summary: All, I am trying to format a new hard drive. It is a Seagate Medalist Pro ST34342A located at http://www.seagate.com/support/disc/specs/ata/st34342a....
Summary: Here is the 15 lines before today's crash: Feb 12 11:50:41 apac-sun01 ebus: [ID 521012 kern.info] power0 at ebus0: offset 14,724000 Feb 12 11:50:41 ap...
Summary: I recently connected my Sun U10 to the adsl line here at home. Since I am also running a couple of PCs on it as well, I'm using the Linksys router (4...
Summary: Ji, Tried "scsi test" and unfortunately I get a "Bus Fault".... doesn't sound too good. It kept displaying it until reboot. In relattion to STOP+N, I ...
Summary: Our Users complain slow response during 2pm to 3pm. How can I confirm that the Solaris Box is running out of CPU? The vmstat shows that a lot of proce...
Summary: Need your help!!! I have a SPARC Ultra 10 machine running Solaris 10, it was using static ip address, recently I changed the config from static ip to ...
Summary: There is a stupid option about setting to always boot to hard driver and it was carelessly selected when Sun Solaris 10 was installed. So whenever "bo...
Summary: Use is subject to license terms. WARNING: md d0: open error on (Unavailable) Cannot open mirrored root device, error 6 Cannot remount root on /pseudo/...
Summary: Yes, its elxl0 (elxl-ZERO)!... the last character is always DIGIT, representing the number of NICs on your machine. It starts with zero, means one. To...
Summary: I have similar devices and configuration, please do following - 1. Configure router to have one static IP address say 192.168.1.25. This can be done b...
Summary: Hello, I have a Sun Ultra 5. I am posting because I am trying to install Debian Linux on it and it does not seem to want to boot from cdrom. When I t...
Summary: Hi, I'm not quiet sure if it is this you are after but I'll give it a try. You must first make sure that the Xserver on the XP-box accepts connections...
Summary: Hi, I've a problem with Solaris Volume Manager (SVM) on the Solaris 8 machine. I had to extend the soft partition with 100MB. I did: metattach d6 100m...
Summary: Hi, i have a solaris 10 machine with 2 ips configured on the same subnet. for example 192.168.1.1 and 192.168.1.2 i want to route all packets to go ou...
Summary: I've done this before but I'm having trouble this time. /dev/dsk/c0t13d0s0 and /dev/dsk/c0t14d0s0 can both mount and unmount to /storage. They are th...
Summary: Hi, I have used the "send" and "expect" cmd using fsecure but now when i am trying to do the same for putty its not allowing me.I just found like its ...
Summary: For knowing the hard disk magic no, I did in this way... $ dd if=/dev/dsk/ c0t0d0s0 of=c0t0d0s0_ label.bin bs=512 count=1 1+0 records in 1+0 records o...
Summary: Hi, FYI. I am not unix admin, need help to resolve followin problem: After my system last reboot, I found 2 filesystems are not mounted. I tried mount...
Summary: I have an issue with my shell script which uses prstat in it. The commands are: prstat 1 1|grep arserverd >> $LOG echo "arserverd value: "`prstat 1 1 ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
