Summary: I'm having a hard time setting up a new install of solaris 8 on an ultra 1 creator with a barracuda ST19171WC. During the install I get a bad magic nu...
Summary: I just got a sparc 20 to play with. It had a real small hd so I put in a 9 gig hd. I want to install solaris 8 on this machine and am getting a magic ...
Summary: I'm having a similar problem, but with a CD that was generated with a CD-Recorder. I'm trying to boot with the newly created CD, but get the messag...
Summary: Installing Solaris 8 on a Ultra 60 with an External SCSI drive and when running boot cdrom I get: configuring /dev /devices Using RPC Bootparams blah ...
Summary: The SparcStation 5 was working fine, but it had the following problems after I successfully installed I/O Jaz drive and rebooted afterwards: Boot devi...
Summary: I have an Ultra 2 with Solaris 2.6 (5/98) installed. I create CD's using a Ricoh Media Master MP7060SE and CDR Publisher 4.85 as the unit platform ...
Summary: I have a Sparc Ultra10 creator 3D. It works with the original hard drive and CD-ROM drive. I upgraded with original Solaris 8 install package without ...
Summary: Hi, If this is not the right place, Please direct me to the right one. I wish to know the hard disk magic number whether I'm getting 0xDABE or ...
Summary: hello, i´ve got a problem installing debian 2.2 on a sun ultra 5. i´ve installed solaris 7 booting from the cd, but when i try to boot whith the debia...
Summary: I have a SparcStation 2 that I salvaged and will not boot from the internal HD right now. I am trying to install solaris 7 from CD. I have an ext...
Summary: Hi, I'm not familiar with solaris and am hoping someone can help me on this simple issue I'm having.. I tried search on the internet for answers but ...
Summary: Dear Sir, We got two Sun Ultra10 .Say Sun1 and Sun2 The new Sun Ultra10(sun1) was working properly we wanted to put the whole software of the old Sun...
Summary: I'm getting the following message when I try to install from CD1: FORCE,CPU-56 (UltraSPARC-IIe 650MHz), No Keyboard OpenBoot 4.0.5, 512 MB memory inst...
Summary: Dear Sir, We got two Sun Ultra10 .Say Sun1 and Sun2 The new Sun Ultra10(sun1) was working properly we wanted to put the whole software of the old Sun...
Summary: Robert, It sounds like we are having the same problem. I am upgrading my sparc station and have installed two new drives. Both drives report the sam...
Summary: Janob, I tried changing the port number on the /etc/services to another number not listed on this list, I can access the ftp from within the LAN with ...
Summary: Hello all. I have a Sparc 20 Workstation that I got off e-bay. Yes, I know. The system had no OS loaded on it when I got it. It has one 4G HD and o...
Summary: Hi, Is any body help me in creating a separate process from c++ application on solaris, as like createprocess() API does in windows. Thnx Sunil ...
Summary: We're installing Slaris 8 on a new Blade 100. When it comes time to create the partitions, I'm prompted with creating slice sizes for each partition ...
Summary: I replaced IDE HDD Seagate Barracuda ST320420A (20Gb), witch crashed, with Seagate Barracuda ST3120814A (120Gb) and the Ultra 10 see just about 8Gb fr...
Summary: Hi to all I have a sun Ultra 10 workstation with the following configuration SUN ULTRA-10 Workstation 440 Mhz CPU 1024 MB RAM 40 GB HDD Seagate (Co...
Summary: Does anyone know how I can install Solaris 8/x86 onto the 2nd IDE drive? I'm okay with custom solutions, such as modifying the boot code, using a boot...
Summary: i have the same type problem, except i am doing a clean install of solaris with a new seagate ST19171N 9.1gig drive in a solaris sparcstation 10 with ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
