Summary: Hello, I wanted to re-install my computer. I was kind of dumb becouse i deleted ALL my partitions except the 8 mb. i deleted it with the install windo...
Summary: hi well my computer has never played high-performace games too well, but now just recently, my comp is crashing after about 5 minutes of play time. Th...
Summary: Hallo: I'm having hard problems with my PC. It was just working fine, when it crashed. After rebooting, it entered the BIOS and showed a warning about...
Summary: I used to have my 2.8 Prescott OCed to about 3.1 GHz. I have a Asus P5GD1-VM motherboard and it does not support overclocking through the BIOS so I wa...
Summary: I have a problem! Whenever I'm playing a computer game, normally one of the newer ones to come out (Battlefield 1942 etc...), my computer locks up, an...
Summary: I don't know how well you read Skyeblue's post alexd ... if You notcied He tried deleting patitions and reinstall windows, and during the process of t...
Summary: I've been able to raise the Fsb to 145/36 (145X15 = 2175) but when I got it up to 146/37 some programs like 3dmark and HL would crash after a while. S...
Summary: Right, I said i'd buy a 3000xp (barton333mhzFSB) and i did. felt like my birthday where i actually did something. Because I don't exactly fear temp pr...
Summary: I have a M848LU PC Chips MB w/AMIBIOS and an AMD Atlon XP 3000+ CPU. I do not want to OC at all, all I want is a stable setting. With 512mb PC2100, wh...
Summary: Just got a new XP 2600 with 266 mhz fsb and installed in on an ASUS A7V 266 mobo which I had already updated the BIOS with the latest from ASUS revisi...
Summary: I have a athlon XP 1500+ over clocked to 1580 and when I use the pc it runns gr8 never over 52 c always 49 to 51 even under bigest load but when it id...
Summary: Hi, I think thats about my limit because in other tests ive done with this setup its shown me that this particular CPU does'nt like a high FSB unfortu...
Summary: i have installed a 133Mhz on my older p.c it seems to be overheating as there a re a host of errors, each time i boot up i get one of these but rarely...
Summary: Hi, I've got an San Diego 3700+, OCed to 2,81GHz (255x11).. First this setup was fully stable.. prime and memtest where both run for about 12hrs sever...
Summary: No problem Jam,just ironing out my max fsb on it. The nf7-s underclocks the vcore a bit from 1.65 to 1.62 so i upped it and the temps stay the same(...
Summary: I forgot to add that Windows will crash after about 10 minutes when using 1.75v with the temps I listed. It usually happens in games (3D especially) w...
Summary: I have just had a new PC. Its an AMD 1800XP with 512mb ram. I have captured some video footage through my firewire card (6 separate mini videos to be ...
Summary: it's a t/bred-checked vcore and it's 1.6 i tried setting the fsb to 133 and now the system crashes after windows has loaded even though i set fsb back...
Summary: Hello, just recently i've upgraded my computer with new graphics,motherboard,ram and processor. And since the upgrade the entire system has been unsta...
Summary: I did my first OC tonight, brought the 1.8a to 2.4 (133fsb) with 1.5 voltage, it was not stable until I got the voltage to 1.6 but now it does not cra...
Summary: I have an A7V8X mobo, Athlon XP 2600+ and 512mb PC3200 RAM (1 stick). I have just assembled a new pc and attempted to power it up for the first time. ...
Summary: Ok heres whats happened, i just recently upgraded my computer from an XP1800 to a XP2500 and upgraded memory from 2 sticks of Crucial 256 PC2100, to 2...
Summary: 2500 Barton Asus A7V8X-X 1 stick 512 2700 1 stick 512 3500 Sound blaster audigy gamer 9800 pro xp sp1 Hey i have overclocked my cpu to 2.15 @ 333 FSB....
Summary: Sir_killalot LOL..i put some doublesided tape on the mirror to hold the sandpaper in place. keep the tape near the paper edge so when you slide the HS...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
