Summary: Hi all. First of all I wanted to thank all of you who've helped me in this community. I've learned a lot since I came in :D Now... I have another que...
Summary: Here are the options in my BiOS under GENiE CONFiG. Which I assume are the only ones I'll use when O'Cing. DRAM CONFIG FSB BUS CONFIG LDT/FSB FREQ RAT...
Summary: Now that I am building a new computer, I want to play with this one. I have a 766 cpu ordered for it so it will be a little faster when I give it to m...
Summary: "I'd like the coolest running cpu that can be o/ced the easiest and furthest" I've seen no data on this but the barton's double L2 cache gives it 75% ...
Summary: Hi TMP-Man, I'll just answer the questions for cpu/ram O/Cing if you don't mind, i'll leave the graphics untill after. Here they are- 1. 29'C-45'C(I h...
Summary: Hello, I've just purchased an xp 1700 Tbred-B cpu and an slk 800 heat sink. I'm looking to o/c this cpu to its max, but wanted to know how I can chec...
Summary: can someone please explain all this overclocking, and related computer terms to me? I have only a little knowledge of what O\Cing is, and how it is do...
Summary: I had a look at the manual too. 1. do you have the additional 4-pin +12v lead plugged into the board near the end of the AGP slot? 2. FSB jumper (near...
Summary: I was wondering about using powerstrip to o/c my videocard. I've used to o/c my radeon 9000 to 286, but my BIOS is still reading the clock speed at 7...
Summary: "It wont let me lower the CPU voltage" I didn't tell you to lower it...I told you to raise (increase) it! Try thes BIOS settings: Go to ADVANCED CHIPS...
Summary: Hopefully you're O/C'ing via the BIOS using the M.I.T menu & not using EasyTune? Here's a few suggestions (I deliberately left out RAM timings & volta...
Summary: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=52475&item=5205495767&rd=1 I am looking to purchase a new pc, I want to be able to play games...
Summary: 1) Not all MBs have the Vcore adjustment feature. Some MBs' are geared up or service the OEM market (like HP, Dell, Emachine), and would not have any...
Summary: Another question in addtion to the one posted below... in my cell menu under the spread spectrum config, it states that my pcie and sata are both ena...
Summary: first specs: PC Chips A11G v1.0 mobo 2x512 Geil DDR2 667 ram AMD X2 3600 Brisbane core @1.9Ghz ok, first there is an option in the bios that allows yo...
Summary: Do NOT overclock using software! You *may* need a BIOS update, but my guess is you're simply not familiar with your BIOS settings....everything you ne...
Summary: Yup, that confirms that your BIOS is setup incorrectly. Try the following settings: MB Intelligent Tweaker(M.I.T.) HT Frequency ratio = 5x CPU Freque...
Summary: Wow! And I thought I was the only one with that problem. I got the exact same thing: athlon xp 2600 running at 1250 mhz. I have an ASUS A7N8X 2.0 bo...
Summary: Silly question but are you sure you are changing CPU bus speed, or CPU spread spectrum? The BUS speed should read 133mhz or 100mhz. And yours should b...
Summary: The correct model number is NF4ST-A9. You should be overclocking thru the BIOS, not WarpSpeeder. In the Advanced Chipset Features menu, try the follow...
Summary: Hello guys, i bought e5200 couple of days ago and tried to overclock it straight away. i managed 3.5Ghz stable under orthos and playing several hours ...
Summary: OK, try these: AI overclock tuner = manual CPU ratio = 7.5x FSB frequency = FSB 1600 / 400MHz PCIE frequency = 100MHz DRAM frequency = DDR533 / 266MHz...
Summary: I just ran prime95 for 3 hours at 240x11, 1.42v. My max temp was 56C. I am thinking all the high temps I was getting were due to Core Center messing u...
Summary: Hi, i'm hoping somebody can help me out here. I'm still fairly new to o'cing so i would be grateful if you could share some of your knowledge with me:...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
