Summary: Greetings, I currently have the Amd Athlon Xp 2400+ T-Breed 266 fsb and 256 L2 cache. My mobo is the Ecs K7S5A Pro, Chipset: SiS735. (Note: I know tha...
Summary: HI, I have recently had a look at my pc's temps, and they are CPU 63c MOBO 44c. The above is at idle. My CPU is an AMD 2000+ and my MOBO is ASUS A7m26...
Summary: I just purchased an Asus Terminator A7VT barebone system. Specs HD-120 gb western digital 7200 rpm CPU/Heatsink - amd 2200+ on a 2600+ heatsink Gra...
Summary: offer online from a company [quote] Super fast Athlon XP2800+ processor mouted, configured and tested on a Gigabyte GA-7VA motherboard. Complete with ...
Summary: Thanks for the help.I'm not into videos or gaming in a big way.Yes I'm thinking of getting a 754 cpu and mobo,and thought if a mobo hasn't got onboard...
Summary: Ok I had no beeps no post when I fired up my machine, so since all my components were still returnable i decided to order a new mobo, ram , and vide...
Summary: First of all congrats on an excellent resource, lots of info here. I would be greatful for your help. I have a new ACORP 7KMM1 Mobo (onboard video), a...
Summary: Hey currently i have a 2500 barton with an a7v8x-x and i am going to be selling both of these to my friends and upgrade. Well i will be taking these ...
Summary: Good day! I bought a PC CHips mobo with a Sempron 2800+ CPU. I connect everything and i know all work fine. The problem is when The bios screen finish...
Summary: The post that the CPU Heatsink fan clamps to broke and the clamp and heatsink came loose. I discovered this when the computer would come on for 3 sec...
Summary: Just got a socket 939 cpu and mobo. installed it inside my case, connected everything. now everything boots fine, however it says windows didnt shut d...
Summary: Maybe someone here can help me. I have a Asus k7v mobo, Athlon 800, 128 m sdram I had a problem with my pc and thought it was the power supply. Change...
Summary: Hello. I have one question. Does the fsb of the cpu have to be the same as the mobo? Why I am asking this is because I am replacing my cpu and mobo an...
Summary: Depends on the CPU type and MoBo. Some 266FSB CPU's such as AMD's will run on a board that only supports a PC100 bus. The CPU will just be under clock...
Summary: Here's the deal: after unplugging all peripherals from my system (HD, CD, Floppy, Modem, NIC, Sound) and powering up with JUST the AGP vid card insta...
Summary: I recently turned on my computer only to find that there is no POST or Boot. I did some trouble shooting and came up with a post when the RAM was rem...
Summary: The hsf was properly applied and spinning. How can I tell if the mobo is fried or not? Also, if I buy a new cpu and the mobo is indeed fried, will it ...
Summary: If you read the first answer it says you can use the CPU. And if you later want to get a better motherboard you will be able to upgrade just that. You...
Summary: I currently have a 2.66 GHZ P4 (533MHZ FSB) Northwood 130nm (cach: 8+12/512). I want to build a new computer. I am thinking about these processors: ($...
Summary: hi i was wondering, is it possible to remove the cpu and heatsink off the motherboard without seperating the two or would it be very difficult. btw it...
Summary: My PC has progresivly become worse. I firt noticed the problem when I would play a high end game my PC would just power off as if I pulled the cord fr...
Summary: If all you're changing is the CPU, (and NOT the motherboard) you should be fine. If changing CPU AND mobo, you might need to do a 'repair install' Ri...
Summary: amd xp 2500+ pc3200 256mb if i use the above parts to test a m/b which supports max. amd 2100+ and pc2100 ram, will that be possible? will i fried the...
Summary: I am planning on building a computer soon, the case I will get is the Antec plus660amg and I think I am getting the Asus A7N8X motherboard. I know th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
