Summary: Help!!! I have not yet installed my OS/2 Warp Version 3 Red Label Box, with only 3.5" Floppy Disks without any CD-ROM Disk. For fear that the disks ...
Summary: I have OS2 on disketts and found out during install that disk 8 is corrupt. Can anyone help with a image of this diskett ? It's the one that installs ...
Summary: I want to install my Warp 4.0 on a newly partitioned area on my hard drive. But I need to have a new set of install disks because the install disks I...
Summary: I have OS/2 2.1 and want to install it in a multiboot and found this webpage by this guy who got new os/2 ide drivers and updated his install disks, b...
Summary: Hi I've just received original os2 v2 disks and manual but the installation disk seams to be faulty. Can anyone send me a winimage of this disk? Thank...
Summary: Hi, I have OS2 3 on cd but don't have the install disks. I know I have to create them, but I don't know what updates I have to make to fix the cd comp...
Summary: Did you have the OS/2 CD? Inside the CD you can find the image of the instalation disks. You can download some images in the IBM's device driver pack ...
Summary: I've seen several postings of this flavor, but unfortunately, I need to repeat it myself. My Installation Disk ("Disk 0")for Warp 3 has somewhat crap...
Summary: Hi,I am trying to install OS/2 v1.3.It seems that my two copies of the installation disk are bad.I was able to recover all the files on one disk excep...
Summary: Hi Siva, I a new in os/2 and still learning about it but, either the installing disk created are corrupted or you could need what ibm call fixdisk, to...
Summary: The above disk set is Disk 1 (1.44 Format) Disks 2 to 5 (XDF Format) Problem now is that on test install, Disk 3 is corrupt. To late to make backup co...
Summary: When installing OS2 V3, the installation disk runs ok then i am prompted for disk 1, once it has read disk1 for about 10 seconds th esystem crashes on...
Summary: Thanks very much for all your help. However, Im almost giving up. This shouldnt be so difficult or take so much time. The new driver you suggested was...
Summary: I'm using OS/2 Installation (fdisk) to try to create the partitions. I've tried adding the greater than 8.4gb installation disk update to the disks, b...
Summary: Actually, you _should_ use FDisk for partitioning. Do not use Partition Magic, as it tends to identify your partitions incorrectly and gives them a wr...
Summary: I have an old 486 laptop that runs the 2.1 for windows version presently. I decided to back up the aging install disks on My windoze box with Winimage...
Summary: OS/2 !! SYS01475 - boot record not found OS/2 !! SYS02027 - boot error meaning the current disk is not bootable. There is file name cdinst.cmd/cdinst....
Summary: Ok this is my first experiance with OS/2, I did a little reading and determined that I needed to modify install disk 1 which I did and I am now able t...
Summary: I have OS/2 Warp 4 and I want to install it to a 13.6 gb hard drive. When i go into setup, it says that the partition tables are corrupt and won't let...
Summary: >>>AFTER INSTALLING A NEW PRINTER I FORGOT THE INSTALLATION DISKS INSIDE THE UNIT. WHEN I RESTARTED MY PC AGAIN I COULDNīT GET INTO WINDOWS OR MS-DOS ...
Summary: Try to create the install-disks with the rawrite(dos)or dd (linux) or rawritewin (windows)or download diskimage exe files from IBM websyte ...
Summary: I had OS/2 2.1 on 3.5" floppys until my basement flooded and ruined the disks (among other stuff). Does anybody know where I can get replacements for...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
