Summary: I was trying to install a fresh install with w2k. I have a compaq presario1500 series, and I was trying to boot with the w2k bootup floppy's and i kee...
Summary: I bought this Compudyne 386 slx/25 brand new and had always worked great. Been sitting on the shelf for about a year and the wife decided she wanted t...
Summary: I have an old compudyne notebook 386sl 20mhz 32-bit processor.My laptop will not boot from the A drive. It recognizes the A drive but will not boot fr...
Summary: I copied the system files from a win95 boot disk over to my hard drive. I then installed win3.1 (as this computer can't handle win95).. But when I tri...
Summary: have dos 3.3 & win 3.00 installed on tandy 1000tx. will not boot, says "invalid system disk" will not let me re-install dos either. any suggestions???...
Summary: formatted harddrive and it will not boot with dos6.22. gives me a message NON SYSTEM DISK OR DISK ERROR. cannot find boot sequence in setup to check m...
Summary: If it is the mouse in DOS that is not working, you need to install MOUSE.COM, which is a mouse driver for DOS. To use it, all you have to do is eithe...
Summary: I just install another Hard drive in the my Compaq, but now it will not boot, If I put the old drives back in it works. I bougth this PC from a friend...
Summary: Hi people, I found this site a few days back and posed questions about installing win3.1. Thanks to all the help I got I was able to track down a very...
Summary: Netscape could be having problems because you do NOT have enough RAM or virtual memory. I know from expirence that Netscape will NOT work properly if...
Summary: If you have downloaded MS-DOS as a ZIP File Download. Disk 1 will not Boot! I think http://www.kewlone.com/ has now overcome this problem with a 6.22 ...
Summary: I have 2 questions I would be most obliged to have answered. Number 1 my computer info: Processor: Intel Pentium I HD's: 2 Formatted Conner Periphial...
Summary: i have a compaq LTE ELITE 4/75CX i upgraded the HDD from 500mb to 5000mb (5GB) i put windows 3x and dos 6.22 on it and ther is no mouse then i re form...
Summary: Anyone know where I can get some info (pin diagrams) on how to use a laptop cga monitor on a PC? I just got a hold of a comcrap slt286 and I have it a...
Summary: I have an old ISA Us Robotics Winmodem (says it on the box) that works with Windows 3.1. It was Windows 3.1 and '95 drivers. It is only a 28.8 though....
Summary: I've installed win 3.11 on a Compaq Lite 4/40CX and all is well except the keyboard will not work in windows. It works great in DOS and I got a serial...
Summary: Industrial computer running DOS 6.22 and Windows 3.11. Hard drive is dying and need to replace. FDISK and FORMAT/S the replacement as a D: drive (s...
Summary: I have an old 486 or early Pentium computer with a dead Hard drive and it seems that the boot floppy (a 5 1/4 drive) is dead also. It has a 3.5 inch ...
Summary: I have been having a problem for a long time with the boot up. My computer will not boot without a floppy boot disk in the drive. It says "Non-Syste...
Summary: Mitchell, Windows 3.1 is designed to operate on computers which first boot up using DOS 6.22 or lower. Win95 and Win98 versions of DOS will not work ...
Summary: I'm not sure how one goes about 'unknowingly' changing config.sys ; ) Assuming that you have DOS6 or higher, try pressing F5 when you see the 'startin...
Summary: A friend of mine deleted a lot of stuff of his computer and now it will not boot up it says error with command iterpator he has win 3.1 so it is prett...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
