Summary: Hi there, I had a bad burnout on a fanless power supply. It went with a big bang and a bit of smoke. Well, those things can happen but after replacing...
Summary: Okay, the computer was/is an old HP Pavilian 8565C, motherboard is an ASUS P2b-VT, and, after a long couple months of it not working, last night I fou...
Summary: A couple of days ago, I took apart my computer to organize the rat's nest. It's summer and it's getting hot so I thought I'd improve the airflow insi...
Summary: I have an ASUS A7V333 Mobo with an Athlon XP2100+. Recently, it wouldn't POST right away and required me to hit the reset button a couple times before...
Summary: About a month ago i tried to replace the heatsink on my computer. It wouldnt post, and i put the heatsink on the wrong way so i figured that the cpu w...
Summary: EliteĀ® L4S5MG3 motherboard running 2.1 ghz Intel, GeForce 4MX video, 256MB DDR, XP. Daughter was on machine said it locked up in the middle of what s...
Summary: I have two identical IBM HDD2517 (810MB). They both will run Win95 on my desktop - Sony Vaio 300MHZ. One will work fine in several different Toshiba...
Summary: I am the brother of the person who posted the 'Won't POST, boots, then no POST' message, December 22, 2003 at 21:30:55 Pacific, I tried what was sugge...
Summary: Need some suggestions please. I believe it's probably a faulty motherboard, but if anyone has any ideas please comment. Motherboard is a GIGABYTE GA-M...
Summary: I just built the following: Athlon 2500+ ECS L7S7A2 512 MB PC2700 RAM Crucial Chaintech GeForce Ti4200 AGP 8x When I plug the HDD Led cable into the m...
Summary: I've heard a lot about the new boards that support a 200MHz bus (KT400 and nForce2) having problems like this, I too have experienced this same proble...
Summary: Hi all, I got an Epox 8K5A2+ board a while ago and its been going beautifully. Today I got hold of a new case and spent the morning transferring all t...
Summary: I have an ASUS A7M266 Mobo that has run great thus far with a XP 1500+. I now purchased an XP 2100+ and the machine won't post, beep nothing. I put t...
Summary: Something is wrong with my harddisk, it happen before sometimes, but this time is won't start for sure. I have two harddisk connect to the motherboard...
Summary: The computer will work fine with just the 24 pin connector in, but as you can see the problem, it won't post without the 8 pin in. When i plug both in...
Summary: One day my comp just went pop fizzle and shut itself off. I had an ECS L7S7A2 with an AMD 2800 Barton and a 128 meg Ti4200. All was working well for...
Summary: One day my comp just went pop fizzle and shut itself off. I had an ECS L7S7A2 with an AMD 2800 Barton and a 128 meg Ti4200. All was working well for...
Summary: I just finished this computer which will be my second comp made. I started it up and all seemed well i started formatting hard drive and it shut itse...
Summary: I've had my custom-build Dual-P3 box for about 3 years. It's a dual p-3 800 with 786 MB RAM and a Ti4600 Vid Card.It has a bootable 20 GB HDD with a 1...
Summary: Alright, so I've upgraded my power supply and my processor. PC Power & Cooling 350 / Thermaltake Silent Purepower 420 Athlon XP 2200+ / Athlon XP 2500...
Summary: I have a MSI K8N Neo4/SLI motherboard with an NVIDIA nForce4 SLI chipset with an AMD 64bit processor. I get a beep for a successful POST but the disp...
Summary: Sorry for posting again but I need this problem solved. The original post is a couple of threads down. I've tried everything here and everything I ca...
Summary: I just bought a used computer with the AK12 mobo, and at first it did OK, but now won't boot at all. Had intermittent problems with power switch on f...
Summary: A friend gave me his PC to look at as it will not post. No beeps, the hard drives and cd drives all start up, the processor fan and video card fan all...